| |
Bush sets |
|
|
|
|
|
 |
Front Suspension Bush Set
Contains all possible 'D' Rubbers for your setup. Please check against your original parts when fitting (picture shows 2 'D' Rubbers; set includes 6).
High Quality: See below for more information.
(Mondial: 8, QV & 3.2) |
SMONFS |
£219.95 |
|
 |
Front Suspension Bush Set (Hard)
Contains all possible 'D' Rubbers for your setup. Please check against your original parts when fitting (picture shows 2 'D' Rubbers; set includes 6).
Uprated: See below for more information.
(Mondial: 8, QV & 3.2) |
SMONFH |
£259.95 |
|
|
|
 |
Rear Suspension Bush Set
Contains all possible 'D' Rubbers for your setup. Please check against your original parts when fitting (picture shows 2 'D' Rubbers; set includes 4).
High Quality: See below for more information.
(Mondial: 8, QV & 3.2) |
SMONRS |
£389.95 |
|
 |
Rear Suspension Bush Set (Hard)
Contains all possible 'D' Rubbers for your setup. Please check against your original parts when fitting (picture shows 2 'D' Rubbers; set includes 4).
Uprated: See below for more information.
(Mondial: 8, QV & 3.2) |
SMONRH |
£429.95 |
|
|
|
 |
Front Suspension Bush Set
Contains all possible 'D' Rubbers for your setup. Please check against your original parts when fitting (picture shows 2 'D' Rubbers; set includes 4).
High Quality: See below for more information.
(Mondial: T) |
SMONTF |
£262.95 |
|
|
|
 |
Rear Suspension Bush Set
Uprated: See below for more information.
(Mondial: T) |
SMONTRS |
£485.45 |
|
| |
|
|
|
|
| |
suspension bushes front: Mondial 8, QV and 3.2 |
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
High Quality Bonded Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(Mondial: 8, QV, 3.2) |
103170
 |
£18.45 |
|
| |
|
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(Mondial: 8, QV, 3.2) |
103170H
|
£22.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Front Wishbone Bush, inner, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(Mondial: 8, QV, 3.2) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Front Anti-Roll Bar ‘D’ Rubber
Ø 21mm
(Mondial: 8, QV, 3.2 (early, with 21mm front anti-roll bar & bracket #114702)) |
114703
|
£14.95 |
|
|
Front Anti-Roll Bar ‘D’ Rubber
Ø 21mm
(Mondial: 3.2 (late, with 21mm front anti-roll bar & bracket #133227)) |
130533
|
£18.95 |
|
|
Front Anti-Roll Bar ‘D’ Rubber
Ø 22mm
(Mondial: 3.2 (late, with 22mm front anti-roll bar & bracket #133227) |
130606
|
£19.95 |
|
|
Front Anti-Roll Bar ‘D’ Rubber
(Mondial: 8 USA) |
118120
|
£23.53 |
|
| |
|
|
|
|
|
Front Torsion Bar Rubber
Supersedes: 126097, 64430
(Mondial: All) |
100984
|
£4.45 |
|
 |
Front Anti-Roll Bar Rubber Inner Bush
Supersedes: 64431
(Mondial: All) |
100985
|
£13.97 |
|
| |
|
|
|
|
|
Upper & Lower Inner Front Wishbone Bush Bolt
4 required per side (8 req. per car)
Supersedes: 100808
(Mondial: 8, QV) |
106419 |
£13.48 |
|
|
Upper & Lower Inner Front Wishbone Bush Bolt
4 required per side (8 req. per car)
Supersedes: 127849
(Mondial: 3.2) |
121693 |
£22.65 |
|
|
Upper & Lower Inner Front Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolt #121693
Supersedes: 16105121
(Mondial: 8, QV, 3.2) |
148020 |
£1.35 |
|
| |
|
|
|
|
|
Front Ball Joint Bolt
3 required per side (6 req. per car)
Positions:
- Inner & Outer Upper Front Ball Joint Bolt
- Outer Lower Front Ball Joint Bolt
Supersedes: 104519
(Mondial: 8, QV, 3.2) |
15971621 |
£0.56 |
|
|
Front Ball Joint Nut
3 required per side (6 req. per car)
Use with bolts #15971621
Supersedes: 104114, 117702
(308: All) |
12574521 |
£0.26 |
|
| |
|
|
|
|
|
Inner Lower Front Ball Joint/Lower Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(Mondial: 8, QV, 3.2) |
15541531 |
£2.55 |
|
|
Lower Front Shock Absorber Mounting Nut
1 required per side (2 req. per car)
Use with bolt #15541531
Supersedes: 16105121
(Mondial: 8, QV, 3.2) |
148020 |
£1.35 |
|
| |
|
|
|
|
|
Lower Front Suspension Fork
2 required per side (4 req. per car)
(Mondial: 8, QV) |
112807 |
£131.42 |
|
|
Lower Front Suspension Fork
2 required per side (4 req. per car)
Supersedes: 121651
(Mondial: 3.2 (pre-ABS)) |
127639 |
£93.43 |
|
|
Lower Front Suspension Fork
2 required per side (4 req. per car)
Currently unavailable
(Mondial: 3.2 (with ABS)) |
130303 |
|
|
| |
|
|
|
|
|
Suspension bushes rear: Mondial 8, QV and 3.2 |
|
|
|
|
Upper & Lower Rear Wishbone Bush, inner & outer
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(Mondial: 8, QV, 3.2) |
103170
|
£18.45 |
|
| |
|
|
|
|
|
Upper & Lower Rear Wishbone Bush, inner & outer
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(Mondial: 8, QV, 3.2) |
103170H
|
£22.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Rear Wishbone Bush, inner & outer, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(Mondial: 8, QV, 3.2) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Rear Anti-Roll Bar ‘D’ Rubber
Ø 14.5mm
(Mondial: All 8, 3.2 (Non-US & C7)) |
116381
|
£19.95 |
|
|
Rear Anti-Roll Bar ‘D’ Rubber
Ø 16.0mm
Supersedes: 640878
Mondial (All QV, 3.2 (US & C7)) |
110874
|
£9.95 |
|
|
Rear Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(365: GT) |
104417 |
£12.95 |
|
|
High Quality Rear Torsion Bar Bracket
Uprated: Stainless Steel
Supersedes: 64429
(Mondial: 8, QV, 3.2) |
104417S
|
£14.95 |
|
| |
|
|
|
|
|
Rear Torsion Bar Rubber
(Mondial: All) |
107335
|
£3.95 |
|
 |
Rear Anti-Roll Bar Spacer for Rubbers
Supersedes: 107336, 154085
(Mondial: All)
|
108294
|
£26.95 |
|
|
Drop Link Silent Block Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(Mondial: All) |
100773
|
£9.20 |
|
|
Drop Link Silent Block Bush Washer
2 required per side (4 req. per car)
(Mondial: 8, QV, 3.2) |
108913 |
£5.30 |
|
|
Drop Link Silent Block Bush Nut
1 required per side (2 req. per car)
Supersedes: 16105121
(Mondial: 8, QV, 3.2) |
148020
|
£1.35 |
|
| |
|
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush Bolt
4 required per side (8 req. per car)
Supersedes: 100808
(Mondial: 8, QV) |
106419 |
£13.48 |
|
|
Upper & Lower Inner Rear Wishbone Bush Bolt
4 required per side (8 req. per car)
Supersedes: 127849
(Mondial: 3.2) |
121693 |
£22.65 |
|
|
Upper Outer Rear Wishbone Bush Bolt
1 required per side (2 req. per car)
(Mondial: 8, QV, 3.2) |
112439 |
£16.79 |
|
|
Lower Outer Rear Wishbone Bush Bolt
1 required per side (2 req. per car)
(Mondial: 8, QV, 3.2) |
112440 |
£15.49 |
|
|
Upper & Lower Inner & Outer Rear Wishbone Bush Nut
6 required per side (12 req. per car)
Use with bolts #106419, 112439, 112440 & 121693
Supersedes: 16105121
(Mondial: 8, QV, 3.2) |
148020 |
£1.35 |
|
|
Upper & Lower Outer Rear Wishbone Bush Washer
2 required per side (4 req. per car)
Use with bolts #112439 & 112440
(Mondial: 8, QV, 3.2) |
106616
|
£0.89 |
|
|
Lower Rear Suspension Fork
2 required per side (4 req. per car)
Supersedes: 127641
(Mondial: 8, QV, 3.2) |
112437 |
£43.80 |
|
| |
|
|
|
|
| |
SUSPENSION bushes FRONT: Mondial T |
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(Mondial: T) |
154537
|
£27.60 |
|
|
Front Anti-Roll Bar ‘D’ Rubber (22mm)
Ø 22mm
(Mondial: T (with 22m front anti-roll bar)) |
130606
|
£19.95 |
|
|
Front Anti-Roll Bar ‘D’ Rubber (23mm)
Ø 23mm
(Mondial: T (with 23m front anti-roll bar)) |
140655
|
£9.72 |
|
|
Front Torsion Bar Rubber
Supersedes: 126097, 64430
(Mondial: T) |
100984
|
£4.45 |
|
| |
|
|
|
|
| |
SUSPENSION BUSHES REAR: Mondial T |
|
|
|
|
Upper Rear Wishbone Bush, inner & outer
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(Mondial: T) |
154537
|
£27.60 |
|
|
Lower Rear Wishbone Bush, outer
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 120813
(Mondial: T) |
154538
|
£29.80 |
|
|
Lower Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(Mondial: T) |
154539
|
£29.80 |
|
|
Drop Link Silent Block Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(Mondial: T) |
100773
|
£9.20 |
|
|
Rear Anti-Roll Bar ‘D’ Rubber
Ø 14.5mm
(Mondial: T) |
116381
|
£19.95 |
|
|
Rear Torsion Bar Rubber
(Mondial: T) |
107335
|
£4.25 |
|
| |
|
|
|
|
|
Ball joints |
|
|
|
|
Upper Ball Joint
(Mondial: 8, QV, 3.2) |
116280 |
£79.00 |
|
|
Upper Ball Joint
(Mondial: T) |
132776 |
£76.00 |
|
| |
|
|
|
|
|
Lower Ball Joint
Supersedes: 114462, 101442, 154536, 640427, 641487
(Mondial: All)
|
133944 |
£78.08 |
|
| |
|
|
|
|
|
Ball Joint Rubber Boot |
24608155 |
£11.60 |
|
|
Ball Joint Washer
1 req. per ball joint (2-4 req. per car)
Supersedes: 12R1
Upper: (Mondial: 8, QV, 3.2)
Lower: (Mondial: All) |
101445 |
£0.40 |
|
|
Ball Joint Nut
1 req. per ball joint (4 req. per car)
Supersedes: Ehrenrejch 035.0145.044.506
(Mondial: All) |
149807 |
£0.61 |
|
| |
|
|
|
|
| |
Suspension Bolts |
|
|
|
|
Lower Front Ball Joint Bolt
(Mondial: T) |
132667 |
£5.15 |
|
|
Lower Rear Fork Bolt
(Mondial: T) |
106422 |
£21.30 |
|
| |
|
|
|
|
| |
Shims |
|
|
|
 |
Wishbone Mounting 'U' Bolt Shim |
|
|
|
| 1.0mm |
101039 |
£1.35 |
|
| 1.5mm |
107338 |
£1.35 |
|
| 2.0mm |
107339 |
£1.35 |
|
| 2.5mm |
107340 |
£1.35 |
|
| 3.0mm |
107341 |
£1.35 |
|
| |
|
|
|
|
|
Upper Ball Joint Shim
1.5mm
Supersedes: 641276
(Mondial: 8, QV, 3.2) |
103256
|
£2.67 |
|
| |
|
|
|
|
Lower Ball Joint Shim |
|
|
|
| 1.0mm |
164484 |
£1.75 |
|
| 1.2mm |
115073 |
£1.75 |
|
| 1.5mm |
101022 |
£1.75 |
|
| 2.0mm |
164485 |
£1.75 |
|
| |
|
|
|
|
| |
suspension spring rubbers |
|
|
|
|
Lower Suspension Spring Rubber
Per shock absorber
(Mondial: All) |
113581
|
£7.39 |
|
|
Upper Suspension Spring Rubber
Per shock absorber
(Mondial: All) |
113582
|
£39.95 |
|
| |
|
|
|
|
| |
HUB |
|
|
|
|
Rear Hub Shaft Lock Nut
44mm
Use with tool RNT-44
Supersedes: 522670, 700648
(Mondial: All)
|
102289 |
£22.45 |
|
 |
Hub Shaft Ring Nut Tool
44mm |
RNT-44 |
£49.50 |
|
|
Rear Hub Upper And Lower Bolt |
105344 |
£24.86 |
|
|
Wheel Hub Centre Core Plug
(Mondial: 8)
|
24615193 |
£5.95 |
|
| |
|
|
|
|
| |
Spring |
|
|
|
|
Front Road Spring
(Mondial: 8 (US Spec), QV, 3.2) |
118124 |
£124.87 |
|
| |
|
|
|
|
| |
Shock absorber |
|
|
|
|
Front Shock Absorber, each
Currently on manufacturer back order
Supersedes: 126622
(Mondial: 8, QV, 3.2) |
114727 |
£172.50 |
|
|
Rear Shock Absorber, each
Currently on manufacturer back order
Supersedes: 126623
(Mondial: 8, QV, 3.2) |
114335 |
£203.52 |
|
 |
Front & Rear Shock Absorber Bush
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(Mondial: 8, QV, 3.2) |
100809
|
£10.95 |
|
|
|
|
Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(Mondial: T) |
130516
|
£17.95 |
|
 |
Retainer Nut for Shock Absorbers
(Mondial: T) |
141860 |
£37.00 |
|
|
Suspension Actuator Gear
With Pin
(Mondial: T) |
SAG456-MONDIALT
|
£36.50 |
|
| |
|
|
|
|
| |
Mounts Mondial T |
|
|
|
|
Front & Rear Top Shock Absorber Mount
(Mondial: All) |
114812 |
£58.80 |
|
| |
|
|
|
|
| |
Drop Link |
|
|
|
 |
Anti-Roll Bar Drop Link
(Mondial: All) |
108432 |
£119.45 |
|
| |
|
|
|
|
| |
WHEEL BEARINGS FRONT |
|
|
|
|
Front Wheel Bearing
(Mondial: All) |
112799 |
£295.99 |
|
 |
Front Wheel Bearing Shaft Washer
(Mondial: 8) |
112800 |
£9.90 |
|
 |
Front Wheel Bearing Shaft Ring Nut
(Mondial: 8) |
112801 |
£52.00 |
|
| |
|
|
|
|
|
Front Wheel Oil Seal
(Mondial: QV, 3.2, T)
|
115968
|
£19.43 |
|
|
Front Wheel Bearing Stay Bolt Washer
(Mondial: QV, 3.2, T)
|
124464 |
£15.88 |
|
|
Front Wheel Bearing Inner Shield
(Mondial: 3.2, T)
|
131279 |
£48.74 |
|
|
Front Wheel Bearing Outer Shield
(Mondial: All)
|
112823 |
£39.83 |
|
| |
|
|
|
|
| |
Wheel bearings Rear |
|
|
|
|
Inner Rear Wheel Bearing
Supersedes: 125934, 145805, RIV AL 35
(Mondial: 8, QV, 3.2, T)
|
101220 |
£29.20
|
|
| |
|
|
|
|
|
Outer Rear Wheel Bearing
(Mondial 8, QV) |
101221 |
£21.18 |
|
|
Outer Rear Wheel Bearing
Supersedes: 125935
(Mondial: 3.2, T) |
144807 |
£56.55 |
|
| |
|
|
|
|
|
Rear Wheel Bearing Outer Oil Seal
(Mondial: 3.0 QV, 8)
|
108047
|
£35.99 |
|
|
Rear Wheel Bearing Outer Oil Seal
(Mondial: 3.2, T)
|
124966
|
£19.60 |
|
|
Rear Outer Wheel Bearing Spacer
(Mondial: 3.2, T)
|
124965
|
£31.43 |
|
 |
Hub Oil Sealing Ring
(Mondial: 8) |
108048 |
£5.95 |
|
| |
|
|
|
|
| |
Grease for Wheel Bearings |
|
|
|
 |
ENI Grease GR MU/EP 2, mineral 400g
ENI GR MU are high-quality lithium soap special-lubricating greases and special-gearbox greases based on mineral oil. Water resistant extreme pressure lithium based grease for heavy loaded bearings and gears.
Product Specifications: Lithium Grease, NLGI: 2; Worked Penetration, 280dmm; ASTM Dropping Point, 185°C
(Mondial: All) |
88830
 |
£5.96 |
|
| |
|
|
|
|
| |
Anti Roll BAr |
|
|
|
|
Anti Roll Bar Washer
(Mondial: QV, 3.2, T) |
105334 |
£6.95 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
 |
Washer
|
10519424 |
£0.02 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.13 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
