| |
Bush sets |
|
|
|
| |
Our silent bloc bush range has the following specifications:-
Rubber is high grade SMR based natural rubber,
available in 68 and 85 shore hardness
Tearing strength is 24MPa
Rubber is bonded to inner and outer metal sections (it is not assembled unbonded and pressed) which means the inner and outer stay in position and do not migrate, and the metal sleeve does not rotate in the rubber
Zinc-plated-yellow or black-passivated for resisting corrosion
Cured at temperature and high pressure |
|
| |
|
|
|
|
 |
Front Suspension Bush Set
High Quality: See individual parts below for more information.
(308: All) |
S308FS |
£269.81 |
|
 |
Front Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(308: All) |
S308FH |
£274.41 |
|
 |
 |
Rear Suspension Bush Set
Contains all possible Torsion Bar Rubbers for your setup. Please check against your original parts when fitting (picture shows 4 Torsion Bar Rubbers; set includes 8).
High Quality: See individual parts below for more information.
(308: GT4) |
S308RS4 |
£290.09 |
|
 |
Rear Suspension Bush Set (Hard)
Contains all possible Torsion Bar Rubbers for your setup. Please check against your original parts when fitting (picture shows 4 Torsion Bar Rubbers; set includes 8).
Uprated: See individual parts below for more information.
(308: GT4) |
S308RH4 |
£264.41 |
|
 |
 |
Rear Suspension Bush Set
High Quality: See individual parts below for more information.
(308: GTB, GTBi, GTB QV) |
S308RSB |
£275.81 |
|
 |
Rear Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(308: GTB, GTBi, GTB QV) |
S308RHB |
£279.41 |
|
|
 |
Rear Suspension Bush Set
High Quality: See individual parts below for more information.
(308: GTS, GTSi, GTS QV) |
S308RSS |
£267.82 |
|
 |
Rear Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(308: GTS, GTSi, GTS QV) |
S308RHS |
£269.21 |
|
| |
|
|
|
|
| |
suspension bushes front |
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(308: All) |
103170
 |
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(308: All) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Front Wishbone Bush, inner, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(308: All) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Front Torsion Bar 'D' Rubber
Supersedes: 106390
(308: All) |
108746
|
£9.95 |
|
|
Front Torsion Bar 'D' Rubber Bracket
To be used with 108746
(308: All) |
106577
|
£17.91 |
|
|
High Quality Front Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
To be used with 108746
(308: All) |
106577S
|
£16.86 |
|
|
Front Torsion Bar Rubber
Supersedes: 126097, 64430
(308: All) |
100984
|
£6.77 |
|
 |
Front Anti Roll Bar Spacer Tubes
(308: All)
|
108998
|
£14.60 |
|
|
Drop Link Silent Block Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(308: All) |
100773
|
£17.79 |
|
|
Drop Link Silent Block Bush Washer
2 required per side (4 req. per car)
(308: All) |
108913
|
£9.23 |
|
| |
|
|
|
|
|
Front Suspension Bush Spacer
Large
(308: All) |
30808005
|
£7.95 |
|
|
Front Suspension Bush Spacer
Small
#104399
(308: All) |
30808010
|
£4.45 |
|
| |
|
|
|
|
|
Upper Inner Front Wishbone Bush Bolt, rear half
1 required per side (2 req. per car)
(308: All) |
105901 |
£10.38 |
|
|
Inner Front Wishbone Bush Bolt
3 required per side (6 req. per car)
Position:
- Upper Inner Front Wishbone Bolt, front half
- Lower Inner Front Wishbone Bush Bolt, front and rear halves
Supersedes: 100808
(308: All) |
106419 |
£13.48 |
|
|
Upper & Lower Inner Front Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolts #105901 & 106419
Supersedes: 16105121
(308: All) |
148020 |
£1.74 |
|
|
Upper Inner Front Wishbone Bush Washer, front half
1 required per side (2 req. per car)
(308: All) |
106426
|
£0.89 |
|
| |
|
|
|
|
| |
Suspension bushes rear |
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(308: All) |
103170
|
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(308: All) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Inner Rear Wishbone Bush, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(308: All) |
103170F |
£39.95 |
|
|
|
Upper & Lower Outer Rear Wishbone Bush Assy. Set
Complete set for one hub (4 complete bush assemblies)
Zinc plated
(308: All)Each complete bush (4 per set) includes 1 of each of:
109902 (107438), 105342 (641216), 101009 (600771),
100796 (94943),
109905 (105339),
100787 (101315, 600750, 660826),
105340 (100786, 601478, 601684), 105343 (641217), 105341 (601685). |
30808091
|
£166.15 |
|
|
Upper & Lower Outer Rear Wishbone Bush Assy. Set
Complete set for one hub (4 complete bush assemblies)
Uprated: Stainless Steel
(308: All) Each complete bush (4 per set) includes 1 of each of:
109902 (107438), 105342 (641216), 101009 (600771),
100796 (94943),
109905 (105339),
100787 (101315, 600750, 660826),
105340 (100786, 601478, 601684), 105343 (641217),
105341 (601685). |
30808090
|
£186.60 |
|
 |
Bush Assy. Inner Bush
Stainless Steel
Supersedes: 105339
(308: All) |
109905-S |
£19.95 |
|
 |
Large Rear Hub Rubber Seal
Supersedes: 641216
(308: All) |
105342
|
£4.25 |
|
 |
Small Rear Hub Rubber Seal
Supersedes: 641217
(308: All) |
105343
|
£3.95 |
|
|
Upper & Lower Inner Rear Wishbone Bush Bolt
4 required per side (8 req. per car)
Supersedes: 100808
(308: All) |
106419 |
£13.48 |
|
|
Upper & Lower Outer Rear Wishbone Bush Bolt
2 required per side (4 req. per car)
(308: All) |
105344 |
£24.86 |
|
|
Upper & Lower Inner & Outer Rear Wishbone Bush Nut
6 required per side (12 req. per car)
Use with bolts #105344 & 106419
Supersedes: 16105121
(308: All) |
148020 |
£1.74 |
|
|
|
Rear Torsion Bar 'D' Rubber
Supersedes: 106391
(308: GT4) |
108747
|
£8.50 |
|
 |
Rear Torsion Bar 'D' Rubber
Supersedes: 106390
(308: GTB, GTBi, GTB QV) |
109010
|
£14.95 |
|
 |
Rear Torsion Bar 'D' Rubber
Supersedes: 103259, 106829, 640183
(308: GTS, GTSi, GTS QV) |
108748
|
£9.50 |
|
|
Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(308: All) |
104417 |
£24.95 |
|
|
High Quality Rear Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
Supersedes: 64429
(308: All) |
104417S
|
£27.95 |
|
|
|
Rear Torsion Bar Rubber
Supersedes: 126097, 64430
(308: 1976 GT4 (to car no. 8608)) |
100984
|
£6.77 |
|
 |
Rear Anti-Roll Bar Rubber Inner Bush
Supersedes: 64431
(308: 1976 GT4 (to car no. 8608)) |
100985
|
£13.97 |
|
|
Rear Torsion Bar Bolt
1 required per side (2 req. per car)
Supersedes: 105962, 95881051
(308: 1976 GT4 (to car no. 8608)) |
15540921 |
£0.95 |
|
| |
|
|
|
|
|
Rear Torsion Bar Rubber
Supersedes: 126097, 64430
(308: GT4 (from car no. 8610), GTB, GTBi, GTB QV) |
108244
|
£6.77 |
|
 |
Anti-Roll Bar Spacer for Rubbers
Supersedes: 107336, 154085
(308: GT4 (from car no. 8610), GTB, GTBi, GTB QV) |
108294
|
£26.95 |
|
|
Rear Torsion Bar Rubber
(308: GTS, GTSi, GTS QV) |
107335
|
£6.52 |
|
|
|
Drop Link Silent Block Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(308: All) |
100773
|
£17.79 |
|
| |
|
|
|
|
| |
Powerflex teflon suspension bushes (trackday / fast road use) |
|
|
|
|
Upper Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Upper Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
| |
|
|
|
|
| |
Ball joints |
|
|
|
|
Upper Ball Joint
(308: All) |
116280/A |
£79.00 |
|
|
Lower Ball Joint
Supersedes: 114462, 101442, 154536, 640427, 641487
(308: All)
|
133944 |
£78.08 |
|
|
Ball Joint Rubber Boot |
24608155 |
£11.60 |
|
|
Ball Joint Washer
1 req. per ball joint (4 req. per car)
Supersedes: 12R1
(308: All) |
101445 |
£0.40 |
|
|
Ball Joint Nut
1 req. per ball joint (4 req. per car)
Supersedes: Ehrenrejch 035.0145.044.506
(308: All) |
149807 |
£0.61 |
|
| |
|
|
|
|
|
Upper Front Ball Joint Bolt
2 required per side (4 req. per car)
Supersedes: 15971431
(308: All) |
15971421 |
£6.95 |
|
|
Lower Front Ball Joint Outer Bolt
1 required per side (2 req. per car)
Supersedes: 104519
(308: All) |
15971621 |
£0.61 |
|
 |
Lower Front Ball Joint/Lower Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 106020, 641275
(308: All) |
107886/A |
£12.95 |
|
|
Upper & Lower Front Ball Joint Nut
3 required per side (6 req. per car)
Use with bolts #15971421 & 15971621
Supersedes: 104114, 117702
(308: All) |
12574521 |
£0.26 |
|
| |
|
|
|
|
| |
Shims |
|
|
|
 |
Wishbone Mounting 'U' Bolt Shim |
|
|
|
| 1.0mm |
101039 |
£1.35 |
|
| 1.5mm |
107338 |
£1.35 |
|
| 2.0mm |
107339 |
£1.35 |
|
| 2.5mm |
107340 |
£1.35 |
|
| 3.0mm |
107341 |
£1.35 |
|
| |
|
|
|
|
|
Upper Ball Joint Shim
1.5mm
Supersedes: 641276
(308: All) |
103256 |
£3.29 |
|
| |
|
|
|
|
Lower Ball Joint Shim |
|
|
|
| 1.0mm |
164484 |
£2.20 |
|
| 1.2mm |
115073 |
£1.75 |
|
| 1.5mm |
101022 |
£1.75 |
|
| 2.0mm |
164485 |
£1.75 |
|
| |
|
|
|
|
| |
Suspension Forks |
|
|
|
|
Lower Front Suspension Fork
2 required per side (4 req. per car)
Supersedes: 104409, 127636
(308: All) |
134929 |
£69.95 |
|
| |
|
|
|
|
|
Lower Rear Suspension Fork
2 required per side (4 req. per car)
(308: GT4 (up to no. 14610), GTB/S (up to no. 26667)) |
104439 |
£69.78 |
|
|
Lower Rear Suspension Fork
2 required per side (4 req. per car)
(308: GT4 (from no. 14612), GTB/S (from no. 26669), GTBi/Si, QV) |
114236 |
£89.69 |
|
| |
|
|
|
|
| |
Front wheel bearings & HUB |
|
|
|
 |
Front Wheel Bearing Set
Includes:
- 1 x Inner Front Wheel Bearing #105844 (Supersedes: 4096101, 4096102)
- 1 x Outer Front Wheel Bearing #105845 (Supersedes: 4096104, 4133234)
(308: All) |
24608101 |
£16.92 |
|
| |
|
|
|
|
|
Front Wheel Oil Seal
Supersedes: 4117608
(308: GT4, GTB/S (to no. 30243)) |
104359 |
£6.55 |
|
|
Front Wheel Oil Seal
(308: GTB/S (from no. 30245), GTBi/Si, QV) |
115968 |
£19.43 |
|
|
Front Wheel Bearing Grease Cap
308 all
|
814635 |
£15.95 |
|
|
Front Wheel Hub Washer
(308: All)
|
101446
|
£12.25 |
|
|
Front Wheel Hub Washer
(308: All) |
60052397 |
£8.64 |
|
| |
|
|
|
|
| |
Front axle nuts |
|
|
|
|
Front Axle Nut
LH Thread
(308: All) |
14044871 |
£8.95 |
|
|
Front Axle Nut
Left Hand Thread
(308: All) |
14044871/H
|
£12.00 |
|
|
Front Axle Nut
Right Hand Thread
(308: All) |
14044171/H
|
£12.00 |
|
| |
|
|
|
|
| |
Rear wheel bearings |
|
|
|
|
Inner Rear Wheel Bearing
Supersedes: 125934, 145805, RIV AL 35
(308: All) |
101220 |
£34.20 |
|
|
Outer Rear Wheel Bearing
Supersedes: AL 40
(308: All) |
101221 |
£38.85 |
|
|
Rear Wheel Bearing Outer Oil Seal
(308: All)
|
108047
|
£35.99 |
|
 |
Rear Wheel Rubber Sealing Ring
(308: GT4, GTB/S, GTBi/Si) |
108048 |
£5.95 |
|
| |
|
|
|
|
| |
Lock nutS |
|
|
|
|
Rear Hub Shaft Lock Nut
44mm
Use with tool RNT-44
Supersedes: 522670, 700648
(308: All) |
102289 |
£28.45 |
|
 |
Hub Shaft Ring Nut Tool
44mm |
RNT-44 |
£56.50 |
|
| |
|
|
|
|
| |
Shock absorbers (only available in pairs) |
|
|
|
|
|
|
Front Shock Absorber, each
Koni
(308: All) |
30808140 |
£348.81 |
|
| |
|
|
|
|
|
Rear Shock Absorber, each
Koni
Correct GT4 rear shock, with correct damping rate and spring position
(308: GT4) |
30808145 |
£348.81 |
|
| |
|
|
|
|
|
|
Standard Front Spring, each
(308: GT4) |
113054 |
£124.50 |
|
Standard Rear Spring, each
(308: GT4) |
113055 |
£99.72 |
|
| |
|
|
|
|
|
|
Uprated Front Spring, each
Uprated
(308: GT4) |
30808175 |
£99.00 |
|
Uprated Rear Spring, each
Uprated
(308: GT4) |
30808190 |
£99.50 |
|
| |
|
|
|
|
|
|
|
Front Shock Absorber, each
Koni
(308: All) |
30808140 |
£348.81 |
|
| |
|
|
|
|
|
Rear Shock Absorber, each
Koni
(308: GTB/S, GTBi/Si, QV) |
30808155 |
£348.81 |
|
| |
|
|
|
|
|
|
Uprated Front Spring, each
Fits both GTB and GTS cars
Uprated
(308: GTB/S, GTBi/Si, GTB/S QV) |
30808165 |
£99.50 |
|
Uprated Rear Spring, each
Fits both GTB and GTS cars
Uprated
(308: GTB/S, GTBi/Si, GTB QV) |
30808180 |
£99.50 |
|
| |
|
|
|
|
| |
|
Front Fast Road/Race Shock Absorber, each
Spax
(308: All) |
30808250 |
£289.58 |
|
|
Rear Fast Road/Race Shock Absorber, each
Spax
(308: All) |
30808255 |
£295.83 |
|
|
|
Uprated Front Spring, each
For Spax Shock Absorber
(308: All) |
30808170 |
£72.77 |
|
 |
Uprated Rear Spring, each
For Spax Shock Absorber
(308: All) |
30808185 |
£79.77 |
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Front & Rear Shock Absorber Bush
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per shock absorber
Supersedes: 101051, 640429, 641393
(308: All) |
100809
|
£12.95 |
|
|
Shock Absorber Bush 42mm Press Tool
(308: All) |
BRT-02
|
£68.00 |
|
| |
|
|
|
|
|
Upper Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 100808
(308: All) |
106419 |
£13.48 |
|
|
Lower Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 106020, 641275
(308: All) |
107886/A |
£12.95 |
|
|
Upper Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 100808
(308: All) |
106419 |
£13.48 |
|
|
Lower Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 100808
(308: GT4 (up to car 12006)) |
106419 |
£13.48 |
|
|
Lower Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(308: GT4 (from car 12008), All GTB/S, GTBi/Si & QV) |
106290 |
£19.81 |
|
|
Lower Rear Shock Absorber Mounting Bolt Nut
Alternative
1 required per side (2 req. per car)
(308: GT4 (from car 12008), All GTB/S, GTBi/Si & QV)
|
16103621/A |
£0.82 |
|
| |
|
|
|
|
| |
Bump Stops |
|
|
|
|
Bump Stop
(308: All) |
104414/A |
£20.11 |
|
| |
|
|
|
|
| |
suspension spring rubbers |
|
|
|
|
Front & Rear Suspension Spring Rubber Set
Per shock absorber
Includes 1 x top & 1 x bottom rubber
(308: All) |
30808220 |
£29.95 |
|
| |
|
|
|
|
| |
Workshop suspension struts |
|
|
|
|
Front Suspension Workshop Strut
Suspension Support Strut, designed to support the vehicle with the shock absorber removed, so the vehicle can still be moved around the workshop and still worked on whilst the shock absorbers are removed.
(308: All) |
30808230 |
£29.95 |
|
|
Rear Suspension Workshop Strut
Suspension Support Strut, designed to support the vehicle with the shock absorber removed, so the vehicle can still be moved around the workshop and still worked on whilst the shock absorbers are removed.
(308: All) |
30808235 |
£29.95 |
|
|
Workshop Suspension Strut Set
2x 30808230, Shorter Strut
2x 30808235, Longer Strut
Suspension Support Strut Set, designed to support the vehicle with the shock absorber removed, so the vehicle can still be moved around the workshop and still worked on whilst the shock absorbers are removed.
(308: All) |
30808240 |
£99.95 |
|
| |
|
|
|
|
| |
Seals |
|
|
|
|
Front Hub Rear Dust Seal
(308: GT4, GTB/S) |
113818 |
£22.38 |
|
|
Large Rear Hub Rubber Seal
Supersedes: 641216
(308: All) |
105342
|
£4.25 |
|
|
Small Rear Hub Rubber Seal
Supersedes: 641217
(308: All) |
105343
|
£3.95 |
|
|
Rear Wheel Bearing Outer Oil Seal
(308: All)
|
108047
|
£35.99 |
|
|
Rear Wheel Rubber Sealing Ring
(308: GT4, GTB/S, GTBi/Si) |
108048 |
£5.95 |
|
|
Front Wheel Oil Seal
Supersedes: 4117608
(308: GT4, GTB/S (to no. 30243)) |
104359 |
£6.55 |
|
|
Front Wheel Oil Seal
(308: GTB/S (from no. 30245), GTBi/Si, QV) |
115968 |
£19.43 |
|
| |
|
|
|
|
| |
Roll bars |
|
|
|
|
Uprated Rear Anti-Roll Bar with Rubbers
19mm
Improves handling
(308: All) |
30808195 |
£274.46 |
|
 |
Rear Anti-Roll Bar Drop Link
(308: All) |
108432 |
£187.43 |
|
| |
|
|
|
|
|
Anti Roll Bar Washer
(308: All) |
105334 |
£6.95 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
 |
Washer
|
10519424 |
£0.02 |
|
|
Nut
(308: All)
|
16100824 |
£0.11 |
|
|
Bolt
(308: All)
|
16043221 |
£0.09 |
|
|
Rear Hub Spacer
(308: All)
|
112475 |
£40.93 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
