| |
cam cover gasket sets |
|
|
|
 |
Cam Cover Gasket Set
Without Seals
Includes:
- 1 x 173540
- 1 x 173541
- 2 x 177055
(360: All)
|
36015020 |
£33.82 |
 |
 |
RH Cam Cover Gasket
(360: All)
|
173540 |
£12.90 |
|
 |
LH Cam Cover Gasket
(360: All)
|
173541 |
£12.90 |
|
 |
Rear End Plate Gasket
Supersedes: 182983
(360: All)
|
177055 |
£4.90 |
|
 |
Camshaft Oil Seal
(360: Challenge Stradale, Modena, Spider) |
187140 |
£20.40 |
|
 |
Spark Plug 'O' Ring
8 required
(360: All) |
167135 |
£2.90 |
|
| |
|
|
|
|
| |
Cam belt |
|
|
|
 |
Cam Belt Tensioner Kit
Includes:
- 2 x 181264
- 2 x 154378
(360: All)
|
36015005 |
£258.95 |
|
 |
Timing/Cam Belt
Supersedes: 181610, 184986
(360: All)
|
154378 |
£29.92 |
|
 |
Cam Belt Tensioner Bearing
(360: All) |
181264 |
£105.00 |
|
 |
Uprated Cam Belt Tensioner Bearing
To replace: 181264
(360: All) |
PT360 |
£120.00 |
|
 |
Tensioner Bearing Adjuster
This tool has been designed to allow better access to the 17mm Hex bolt that secures the Tensioner bearing. Made from high alloy steel and nickel plated for lifelong protection. 1/2" square drive.
To replace: 95972938-A
(360: All) |
AV2938-A |
£45.00 |
|
| |
|
|
|
|
| |
Hydraulic tensioner |
|
|
|
 |
Hydraulic Tensioner
Supersedes: 192920, 185425
Left Hand
(360: All) |
202784 |
£245.50 |
|
 |
Hydraulic Tensioner
Right Hand
(360: All) |
157356 |
£181.79 |
|
 |
Tensioner Body Fixing Bolt
(360: Challenge Stradale, Modena, Spider) |
185234 |
£31.90 |
|
| |
|
|
|
|
| |
ValveS |
|
|
|
 |
|
Inlet Valve Guide
Supersedes: 149900, 172328
(360: All) |
176437 |
£14.95 |
|
|
Exhaust Valve Guide
Supersedes: 148190, 172329
(360: All) |
176438 |
£14.95 |
|
|
360 Inlet Valve
(360: All) |
175157 |
£80.45 |
|
|
360 Exhaust Valve |
35515010 |
£28.75 |
|
|
Valve Collet
(360: All) |
157986 |
£1.52 |
|
 |
|
Inlet & Exhaust Valve Guide
Supersedes: 149900, 172328
(430: Coupe, Spider) |
176437 |
£14.95 |
|
|
Valve Tappet
(430: All) |
194700 |
£2.81 |
|
| |
|
|
|
|
| |
Valve stem seal |
|
|
|
 |
Valve Stem Oil Seal
(360: All); (430: All) |
148153 |
£1.26 |
|
 |
Valve Seal Tool for 8mm diameter valve guide
Designed to overcome the problem of correctly installing valve stem seals. The seal is simply inserted onto the tool (see enlarged picture) and the tool is then inserted into the valve guide. The seal is now perfectly square to the location diameter and with a small amount of pressure on the end of the tool, the seal is installed effortlessly, without damage and right first time. |
VST-01 |
£45.00 |
|
| |
|
|
|
|
| |
nuts |
|
|
|
 |
Cylinder Head Nut
(360: All) |
148093 |
£15.15 |
|
|
CP Dome Nuts for Cam Covers
Pack of 10 as orginal chrome-plate on brass
Supersedes: 151230, 10044
|
24615170 |
£2.95 |
|
| |
|
|
|
|
| |
o rings |
|
|
|
 |
Water Pump Spring Plug ‘O’ Ring
(456: MGT (from engine no. 53763), MGTA (from engine no. 54332)); (550: All); (575: All); (612: Scaglietti) |
147278 |
£0.31 |
|
| |
|
|
|
|
| |
Gaskets |
|
|
|
 |
Head Gasket (Elring)
(360: All) |
174853 |
£82.10 |
|
| |
|
|
|
|
| |
Valve shims |
|
|
|
 |
Valve Shim Removal Tool
Set:
- Hardened & ground bucket tool with serrated finger grips
- Blacked Chrome Vanadium Steel lever tool
Supersedes: 95979560
|
AS9560 |
£76.00 |
|
| |
|
|
|
|
