| |
Bush sets |
|
|
|
| |
Our silent bloc bush range has the following specifications:-
Rubber is high grade SMR based natural rubber,
available in 68 and 85 shore hardness
Tearing strength is 24MPa
Rubber is bonded to inner and outer metal sections (it is not assembled unbonded and pressed) which means the inner and outer stay in position and do not migrate, and the metal sleeve does not rotate in the rubber
Zinc-plated-yellow or black-passivated for resisting corrosion
Cured at temperature and high pressure |
|
| |
|
|
|
|
 |
Front Suspension Bush Set
High Quality: See individual parts below for more information.
(208: 1975 GT4, 1982 Turbo) |
S308FS |
£269.81 |
|
 |
Front Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(208: 1975 GT4, 1982 Turbo) |
S308FH |
£274.41 |
|
 |
 |
Front Suspension Set
High Quality: See individual parts below for more information.
(208: 1989 Turbo (to car no. 76625 – pre ABS)) |
S328FS |
£257.91 |
|
 |
Front Suspension Set (Hard)
Uprated: See individual parts below for more information.
(208: 1989 Turbo (to car no. 76625 – pre ABS)) |
S328FH |
£261.51 |
|
|
|
Front Suspension Set
High Quality: See individual parts below for more information.
(208: 1989 Turbo (from car no. 76626 - with ABS))
|
S328FS88L |
£292.93 |
|
|
Front Suspension Set (Hard)
Uprated: See individual parts below for more information.
(208: 1989 Turbo (from car no. 76626 - with ABS)) |
S328FH88L |
£296.53 |
|
 |
 |
Rear Suspension Bush Set
High Quality: See individual parts below for more information.
(208: 1975 GT4) |
S208RS4 |
£261.35 |
|
 |
Rear Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(208: 1975 GT4) |
S208RH4 |
£258.01 |
|
|
 |
Rear Suspension Bush Set
High Quality: See individual parts below for more information.
(208: 1982 GTB Turbo, 1989 Turbo (up to car 76625 - pre ABS)) |
S308RSB |
£275.81 |
|
 |
Rear Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(208: 1982 GTB Turbo, 1989 Turbo (up to car 76625 - pre ABS)) |
S308RHB |
£279.41 |
|
|
 |
Rear Suspension Bush Set
High Quality: See individual parts below for more information.
(208: 1982 GTS Turbo) |
S308RSS |
£267.82 |
|
 |
Rear Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(208: 1982 GTS Turbo) |
S308RHS |
£269.21 |
|
|
|
Rear Suspension Bush Set
High Quality: See individual parts below for more information.
(208: 1989 Turbo (from car 76626 - with ABS)) |
S208RS89L |
£384.95 |
|
|
Rear Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(208: 1989 Turbo (from car 76626 - with ABS)) |
S208RH89L |
£472.14 |
|
| |
|
|
|
|
| |
suspension bushes front |
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: All) |
103170
 |
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: All) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Front Wishbone Bush, inner, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: All) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Front Suspension Bush Spacer
Large
(208: All 1975 GT4 & 1982 Turbo, 1989 Turbo (up to car 76625)) |
30808005
|
£7.95 |
|
|
Front Suspension Bush Spacer
Small
#104399
(208: All 1975 GT4 & 1982 Turbo, 1989 Turbo (up to car 76625)) |
30808010
|
£4.45 |
|
| |
|
|
|
|
|
Front Torsion Bar 'D' Rubber
Supersedes: 106390
(208: 1975 GT4, 1982 Turbo, 1989 Turbo (up to car 76625)) |
108746
|
£9.95 |
|
|
Front Torsion Bar 'D' Rubber Bracket
To be used with 108746
(208: 1975 GT4, 1982 Turbo) |
106577
|
£17.91 |
|
|
High Quality Front Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
To be used with 108746
(208: 1975 GT4, 1982 Turbo) |
106577S
|
£16.86 |
|
|
Front Torsion Bar 'D' Rubber
(208: 1989 Turbo (from car 76626)) |
130533
|
£28.96 |
|
|
Torsion Bar 'D' Rubber Bracket
Zinc Plated
Supersedes: 64429
(208: 1975 GT4, 1982 Turbo) |
104417 |
£24.95 |
|
|
Front Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
(208: 1975 GT4, 1982 Turbo) |
104417S
|
£27.95 |
|
|
Front Torsion Bar Rubber
Supersedes: 126097, 64430
(208: All) |
100984
|
£6.77 |
|
 |
Front Torsion Bar Rubber Inner Bush
(208: 1975 GT4, 1982 Turbo, 1989 Turbo (to car no. 76625))
|
108998
|
£14.60 |
|
 |
Anti-Roll Bar Rubber Inner Bush
Supersedes: 64431
(208: 1989 Turbo (from car 76626)) |
100985
|
£13.97 |
|
|
Drop Link Silent Block Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(208: GT4, 1982 Turbo) |
100773
|
£17.79 |
|
|
Drop Link Silent Block Bush Washer
2 required per side (4 req. per car)
(208: GT4, 1982 Turbo) |
108913 |
£9.23 |
|
| |
|
|
|
|
| |
Suspension bushes rear |
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: All) |
103170
|
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: All) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Inner Rear Wishbone Bush, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: All) |
103170F |
£39.95 |
|
|
|
Upper & Lower Outer Rear Wishbone Bush Assy. Set
Complete set for one hub (4 complete bush assemblies)
Zinc plated
(208: All 1975 GT4 & 1982 Turbo, 1989 Turbo (up to car 76625 - pre ABS))Each complete bush (4 per set) includes 1 of each of:
109902 (107438), 105342 (641216), 101009 (600771),
100796 (94943),
109905 (105339),
100787 (101315, 600750, 660826),
105340 (100786, 601478, 601684), 105343 (641217), 105341 (601685). |
30808091
|
£166.15 |
|
|
Upper & Lower Outer Rear Wishbone Bush Assy. Set
Complete set for one hub (4 complete bush assemblies)
Uprated: Stainless Steel
(208: All 1975 GT4 & 1982 Turbo, 1989 Turbo (up to car 76625 - pre ABS)) Each complete bush (4 per set) includes 1 of each of:
109902 (107438), 105342 (641216), 101009 (600771),
100796 (94943),
109905 (105339),
100787 (101315, 600750, 660826),
105340 (100786, 601478, 601684), 105343 (641217),
105341 (601685). |
30808090
|
£186.60 |
|
 |
Bush Assy. Inner Bush
Stainless Steel
Supersedes: 105339
(208: All 1975 GT4 & 1982 Turbo, 1989 Turbo (up to car 76625 - pre ABS)) |
109905-S |
£19.95 |
|
 |
Large Rear Hub Rubber Seal
Supersedes: 641216
(208: All 1975 GT4 & 1982 Turbo, 1989 Turbo (up to car 76625 - pre ABS)) |
105342
|
£4.25 |
|
 |
Small Rear Hub Rubber Seal
Supersedes: 641217
(208: All 1975 GT4 & 1982 Turbo, 1989 Turbo (up to car 76625 - pre ABS)) |
105343
|
£3.95 |
|
|
|
Upper & Lower Outer Rear Wishbone Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: 1989 Turbo (from car no. 76626 - with ABS)) |
103170
|
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Outer Rear Wishbone Bush
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: 1989 Turbo (from car no. 76626 - with ABS)) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Outer Rear Wishbone Bush, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(208: 1989 Turbo (from car no. 76626 - with ABS)) |
103170F |
£39.95 |
|
|
|
Rear Torsion Bar 'D' Rubber
Supersedes: 106391
(208: GT4) |
108747
|
£8.50 |
|
 |
Rear Torsion Bar 'D' Rubber
Supersedes: 106390
(208: 1982 GTB Turbo, 1989 Turbo) |
109010
|
£14.95 |
|
 |
Rear Torsion Bar 'D' Rubber
Supersedes: 103259, 106829, 640183
(208: 1982 GTS Turbo) |
108748
|
£9.50 |
|
|
Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(208: All) |
104417 |
£24.95 |
|
|
High Quality Rear Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
Supersedes: 64429
(208: All) |
104417S
|
£27.95 |
|
| |
|
|
|
|
|
Rear Torsion Bar Rubber
Supersedes: 126097, 64430
(208: GT4, 1982 GTB Turbo, 1989 Turbo (to car 76625 - pre ABS)) |
108244
|
£6.77 |
|
 |
Anti-Roll Bar Spacer for Rubbers
Supersedes: 107336, 154085
(208: GT4, GTB) |
108294
|
£26.95 |
|
|
Rear Torsion Bar Rubber
(1982 GTS Turbo, 1989 Turbo (from car 76626 - with ABS)) |
107335
|
£6.52 |
|
|
Rear Torsion Bar Washer
2 required per side (4 req. per car)
(208: GT4, GTB/S, 1982 GTB Turbo, 1989 Turbo (to car 76625 - pre ABS)) |
107409 |
£1.99 |
|
| |
|
|
|
|
|
Drop Link Silent Block Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(208: All) |
100773
|
£17.79 |
|
| |
|
|
|
|
| |
Powerflex teflon suspension bushes (trackday / fast road use) |
|
|
|
|
Upper Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Rear Outer Wishbone Bush
Uprated: Polyurethane
Powerflex
(288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Upper Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
| |
|
|
|
|
| |
Suspension Nuts & Bolts |
|
|
|
 |
|
Upper Inner Front Wishbone Bush Bolt, rear half
1 required per side (2 req. per car)
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
105901 |
£10.38 |
|
|
Inner Front Wishbone Bush Bolt
3 required per side (6 req. per car)
Position:
- Upper Inner Front Wishbone Bolt, front half
- Lower Inner Front Wishbone Bush Bolt, front and rear halves
Supersedes: 100808
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
106419 |
£13.48 |
|
|
Upper & Lower Inner Front Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolts #105901 & 106419
Supersedes: 16105121
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
148020 |
£3.89 |
|
|
Upper Inner Front Wishbone Bush Washer, front half
1 required per side (2 req. per car)
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
106426
|
£0.89 |
|
|
Upper Front Ball Joint Bolt
2 required per side (4 req. per car)
Supersedes: 15971431
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
15971421 |
£6.95 |
|
|
Lower Outer Front Ball Joint Bolt
1 required per side (2 req. per car)
Supersedes: 104519
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
15971621 |
£0.61 |
|
 |
Lower Front Ball Joint/Lower Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 106020, 641275
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
107886/A |
£12.95 |
|
 |
Upper & Lower Front Ball Joint Nut
3 required per side (6 req. per car)
Use with bolts #15971421 & 15971621
Supersedes: 104114, 117702
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo)
|
M10NUT |
£0.34 |
|
 |
|
Upper & Lower Inner Rear Wishbone Bush Bolt
4 required per side (8 req. per car)
Supersedes: 100808
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
106419 |
£13.48 |
|
|
Upper & Lower Outer Rear Wishbone Bush Bolt
2 required per side (4 req. per car)
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
105344 |
£24.86 |
|
|
Upper & Lower Inner & Outer Rear Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolts #105344 & 106419
Supersedes: 16105121
(208: 1975 GT4, 1981 GTB/S, 1982 Turbo) |
148020 |
£3.89 |
|
|
Front Axle Bolt
(208: GTB/S Turbo) |
14238731 |
£0.67 |
|
 |
|
Upper Inner Front Wishbone Bush Bolt, front half
1 required per side (2 req. per car)
Supersedes: 127849
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
121693 |
£22.65 |
|
|
Upper Inner Front Wishbone Bush Bolt, rear half
1 required per side (2 req. per car)
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
105901 |
£10.38 |
|
|
Lower Inner Front Wishbone Bush Bolt
71mm
2 required per side (4 req. per car)
Supersedes: 100808
(208: 1989 Turbo (up to car 76625 - pre-ABS, check length)) |
106419 |
£13.48 |
|
|
Lower Inner Front Wishbone Bush Bolt
68mm
2 required per side (4 req. per car)
Supersedes: 127849
(208: 1989 Turbo (up to car 76625 - pre-ABS, check length)) |
121693 |
£22.65 |
|
|
Upper & Lower Inner Front Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolts #105901, 106419 & 121693
Supersedes: 16105121
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
148020 |
£3.89 |
|
|
Upper Inner Front Wishbone Bush Washer, front half
1 required per side (2 req. per car)
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
106426
|
£0.89 |
|
|
Upper Front Ball Joint Bolt
2 required per side (4 req. per car)
Supersedes: 15971431
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
15971421 |
£6.95 |
|
|
Lower Outer Front Ball Joint Bolt
1 required per side (2 req. per car)
Supersedes: 104519
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
15971621 |
£0.61 |
|
|
Lower Front Ball Joint/Lower Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
105344 |
£24.86 |
|
|
Upper & Lower Front Ball Joint Nut
3 required per side (6 req. per car)
Use with bolts #105344, 15971421 & 15971621
Supersedes: 104114, 117702
(208: 1989 Turbo (up to car 76625 - pre-ABS))
|
M10NUT |
£0.34 |
|
|
|
Upper & Lower Inner Rear Wishbone Bush Bolt
4 required per side (8 req. per car)
Supersedes: 100808
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
106419 |
£13.48 |
|
|
Upper & Lower Outer Rear Wishbone Bush Bolt
2 required per side (4 req. per car)
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
105344 |
£24.86 |
|
|
Upper & Lower Inner & Outer Rear Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolts #105344 & 106419
Supersedes: 16105121
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
148020 |
£3.89 |
|
 |
Hub Nut
(208: 1989 Turbo) |
124642 |
£12.95 |
|
| |
|
|
|
|
| |
Suspension Forks |
|
|
|
|
Lower Front Suspension Fork
2 required per side (4 req. per car)
Supersedes: 104409, 127636
(208: GT4, GTB/S & 1982 Turbo, 1989 Turbo (up to car 76625 - pre-ABS)) |
134929 |
£69.95 |
|
| |
|
|
|
|
|
Lower Rear Suspension Fork
2 required per side (4 req. per car)
(208: GT4) |
104439 |
£69.78 |
|
|
Lower Rear Suspension Fork
2 required per side (4 req. per car)
Supersedes: 104409, 127636
(208: GTB/S & 1982 Turbo, 1989 Turbo (up to car 76625 - pre-ABS)) |
114236 |
£89.69 |
|
| |
|
|
|
|
| |
Stub Axle |
|
|
|
 |
RH Front Stub Axle
(208: GTB/S Turbo) |
125711/A |
£987.56
|
|
 |
Front Stub Axle Washer
(208: GTB/S Turbo) |
118522 |
£8.61 |
|
| |
|
|
|
|
| |
Front wheel bearings & HUB |
|
|
|
 |
Front Wheel Bearing Set
Includes:
- 1 x Inner Front Wheel Bearing #105844 (Supersedes: 4096101, 4096102)
- 1 x Outer Front Wheel Bearing #105845 (Supersedes: 4096104, 4133234)
(208: 1975 GT4, 1982 Turbo) |
24608101 |
£16.92 |
|
| |
|
|
|
|
|
Front Wheel Bearing
(208: 1989 Turbo) |
112799 |
£363.21 |
|
| |
|
|
|
|
|
Front Wheel Oil Seal
Supersedes: 4117608
(208: 1975 GT4) |
104359 |
£8.74 |
|
|
Front Wheel Oil Seal
(208: 1982 & 1989 Turbo) |
115968 |
£19.43 |
|
|
Front Wheel Bearing Grease Cap
(208: All)
|
814635 |
£15.95 |
|
|
Front Wheel Hub Washer
(208: All)
|
101446
 |
£12.25 |
|
|
Front Wheel Hub Washer
(208: All) |
60052397 |
£8.64 |
|
|
Front Wheel Bearing Stay Bolt Washer
(208: GTB/S)
|
124464 |
£15.88 |
|
|
Front Wheel Bearing Inner Shield
(208: Turbo)
|
131279 |
£48.74 |
|
|
Front Wheel Bearing Outer Shield
(208: Turbo)
|
112823 |
£39.83 |
|
 |
Hub Cover
(208: GTB/GTS Turbo) |
131278 |
£9.95 |
|
 |
Front Hub Shaft Pin
(208: GTB/GTS Turbo) |
13909870 |
£0.46 |
|
| |
|
|
|
|
| |
Front axle nuts |
|
|
|
|
Front Axle Nut
LH Thread
(208: 1975 GT4, 1982 Turbo) |
14044871 |
£8.95 |
|
|
Front Axle Nut
Left Hand Thread
(208: 1975 GT4, 1982 Turbo) |
14044871/H
|
£12.00 |
|
|
Front Axle Nut
Right Hand Thread
(208: 1975 GT4, 1982 Turbo) |
14044171/H
|
£12.00 |
|
| |
|
|
|
|
| |
Rear wheel bearings & Hub |
|
|
|
|
Inner Rear Wheel Bearing
Supersedes: 125934, 145805, RIV AL 35
(208: All) |
101220 |
£34.20 |
|
| |
|
|
|
|
|
Outer Rear Wheel Bearing
Supersedes: AL 40
(208: 1975 GT4, 1982 Turbo) |
101221 |
£38.85 |
|
|
Outer Rear Wheel Bearing
Supersedes: 125935
(208: 1989 Turbo) |
144807 |
£86.28 |
|
| |
|
|
|
|
|
Rear Outer Wheel Bearing Spacer
(208: 1989 Turbo)
|
124965
|
£38.21 |
|
|
Rear Wheel Bearing Outer Oil Seal
(208: 1975 GT4, GTB/S, 1982 Turbo)
|
108047
|
£35.99 |
|
|
Rear Wheel Bearing Outer Oil Seal
(208: 1989 Turbo)
|
124966
|
£19.60 |
|
 |
Rear Wheel Rubber Sealing Ring
(208: 1975 GT4) |
108048 |
£5.95 |
|
 |
Rear Hub Cover Ring
(208: GTB/S Turbo) |
103117 |
£54.01 |
|
|
Rear Hub Spacer
(208: All)
|
112475 |
£45.13 |
|
| |
|
|
|
|
| |
Lock nutS |
|
|
|
|
Rear Hub Shaft Lock Nut
44mm
Use with tool RNT-44
Supersedes: 522670, 700648
(208: All) |
102289 |
£28.45 |
|
 |
Hub Shaft Ring Nut Tool
44mm |
RNT-44 |
£56.50 |
|
| |
|
|
|
|
| |
Shock absorbers (only available in pairs) |
|
|
|
 |
|
Front Shock Absorber, each
Koni
(208: GT4) |
30808140 |
£360.00 |
|
|
Rear Shock Absorber, each
Koni
Correct GT4 rear shock, with correct damping rate and spring position
(208: GT4) |
30808145 |
£388.81 |
|
|
Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(208: GT4) |
100809
|
£12.95 |
|
|
Upper Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 100808
(208: GT4) |
106419 |
£13.48 |
|
|
Lower Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 106020, 641275
(208: GT4) |
107886/A |
£12.95 |
|
|
Upper Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 100808
(208: GT4) |
106419 |
£13.48 |
|
|
Upper Rear Shock Absorber Mounting Bolt Nut
Alternative
1 required per side (2 req. per car)
(208: GT4)
|
16103621/A |
£0.92 |
|
|
Lower Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(208: GT4) |
106290 |
£19.81 |
|
|
Lower Rear Shock Absorber Mounting Bolt Nut
Alternative
1 required per side (2 req. per car)
(208: GT4)
|
16103621/A |
£0.92 |
|
 |
|
Rear Shock Absorber, each
Koni
(208: 1982 Turbo) |
30808155 |
£360.00 |
|
|
Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(208: 1982 Turbo) |
100809
|
£12.95 |
|
|
Lower Front Shock Absorber Mounting Bolt
(208: 1982 Turbo) |
107886/A |
£12.95 |
|
|
Upper Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 100808
(208: 1982 Turbo) |
106419 |
£13.48 |
|
|
Lower Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(208: 1982 Turbo) |
106290 |
£19.81 |
|
|
Lower Rear Shock Absorber Mounting Bolt Nut
Alternative
1 required per side (2 req. per car)
(208: 1982 Turbo)
|
16103621/A |
£0.92 |
|
 |
|
Front Shock Absorber, each
Supersedes: 128177, 130939
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
133177 |
£459.71 |
|
|
Rear Shock Absorber, each
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
128178 |
£427.42 |
|
|
Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
100809
|
£12.95 |
|
|
Upper Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 127849
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
121693 |
£22.65 |
|
|
Lower Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(208: 1989 Turbo (up to car 76625 - pre-ABS)) |
106290 |
£19.81 |
|
|
Lower Rear Shock Absorber Mounting Bolt Nut
Alternative
1 required per side (2 req. per car)
(208: 1989 Turbo (up to car 76625 - pre-ABS))
|
16103621/A |
£0.92 |
|
|
|
Front Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(208:
1989 Turbo (from car 76626 to 78612 - with ABS)) |
100809
|
£12.95 |
|
|
Front Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(208: 1989 Turbo (from car 78613 - with ABS)) |
130516
|
£24.74 |
|
| |
|
|
|
|
|
Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(208: 1989 Turbo (From car 76626 - with ABS) |
130516
|
£24.74 |
|
| |
|
|
|
|
| |
mounts |
|
|
|
|
Front Shock Absorber Top Mount
(208: 1989 Turbo (From Car 76626 - with ABS)) |
114812 |
£64.80 |
|
|
Top Mount Washer
2 required per mount
(208: 1989 Turbo (From Car 76626 - with ABS)) |
114815 |
£1.80 |
|
| |
|
|
|
|
| |
Road springs |
|
|
|
|
|
|
Uprated Front Spring, each
(208: GT4) |
30808175 |
£99.00 |
|
Uprated Rear Spring, each
(208: GT4) |
30808190 |
£99.50 |
|
|
|
|
Uprated Rear Spring, each
(208: 1982 GTB/S Turbo) |
30808180 |
£99.50 |
|
| |
|
|
|
|
| |
suspension spring rubbers |
|
|
|
|
Front & Rear Suspension Spring Rubber Set
Per shock absorber
Includes 1 x top & 1 x bottom rubber
Supersedes: 103263, 103264, 105223, 640423, 640424
(208: All GT4, All 1982 Turbo, 1989 Turbo (up to car 76625 - pre-ABS)) |
30808220
|
£29.95 |
|
|
Rear Suspension Spring Rubber Set
Per shock absorber
Includes 1 x top & 1 x bottom rubber
Supersedes: 103263, 103264, 105223, 640423, 640424
(208: 1989 Turbo (from car 76626 - with ABS)) |
30808220
|
£29.95 |
|
|
Lower Suspension Spring Rubber
Per shock absorber
(208: 1989 Turbo) |
113581
|
£11.95 |
|
|
Upper Suspension Spring Rubber
Per shock absorber
(208: 1989 Turbo) |
113582
|
£39.95 |
|
| |
Bump Stops |
|
|
|
|
Bump Stop
(208: All) |
104414/A |
£20.11 |
|
| |
|
|
|
|
| |
Roll bars |
|
|
|
|
Uprated Rear Anti-Roll Bar with Rubbers
19mm
Improves handling
(208: GT4, 1982 GTB Turbo, 1989 Turbo (up to car no. 76625 - Pre-ABS)) |
30808195 |
£274.46 |
|
 |
Rear Anti-Roll Bar Drop Link
(208: All) |
108432 |
£187.43 |
|
 |
Rear Anti-Roll Bar Washer
(208: Turbo) |
117285 |
£1.27 |
|
| |
|
|
|
|
| |
Ball joints |
|
|
|
|
Upper Ball Joint
(208: All) |
116280/A |
£79.00 |
|
|
Lower Ball Joint
Supersedes: 114462, 101442, 154536, 640427, 641487
(208: All)
|
133944 |
£78.08 |
|
|
Lower Ball Joint Rubber Dust Cover Kit
Supersedes: 116280/K
(208: All)
|
133944/K |
£15.38 |
|
|
Ball Joint Rubber Boot |
24608155 |
£11.60 |
|
|
Ball Joint Washer
1 req. per ball joint (4 req. per car)
Supersedes: 12R1
(208: All) |
101445 |
£0.40 |
|
|
Ball Joint Nut
1 req. per ball joint (4 req. per car)
Supersedes: Ehrenrejch 035.0145.044.506
(208: All) |
149807 |
£0.61 |
|
| |
|
|
|
|
| |
Shims |
|
|
|
 |
Wishbone Mounting 'U' Bolt Shim |
|
|
|
| 1.0mm |
101039 |
£1.35 |
|
| 1.5mm |
107338 |
£1.35 |
|
| 2.0mm |
107339 |
£1.35 |
|
| 2.5mm |
107340 |
£1.35 |
|
| 3.0mm |
107341 |
£1.35 |
|
| |
|
|
|
|
|
Upper Ball Joint Shim
1.5mm
Supersedes: 641276
(208: All) |
103256
|
£3.29 |
|
| |
|
|
|
|
Lower Ball Joint Shim |
|
|
|
| 1.0mm |
164484 |
£2.20 |
|
| 1.2mm |
115073 |
£1.75 |
|
| 1.5mm |
101022 |
£1.75 |
|
| 2.0mm |
164485 |
£1.75 |
|
| |
|
|
|
|
| |
Anti Roll Bar |
|
|
|
|
Anti Roll Bar Washer
(208: All) |
105334 |
£6.95 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
 |
Washer
|
10519424 |
£0.02 |
|
|
Bolt
(208: GTB/S, Turbo) |
16043221 |
£0.09 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
|
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
