| |
Our silent bloc bush range has the following specifications:-
Rubber is high grade SMR based natural rubber,
available in 68 and 85 shore hardness
Tearing strength is 24MPa
Rubber is bonded to inner and outer metal sections (it is not assembled unbonded and pressed) which means the inner and outer stay in position and do not migrate, and the metal sleeve does not rotate in the rubber
Zinc-plated-yellow or black-passivated for resisting corrosion
Cured at temperature and high pressure |
|
| |
|
|
|
|
| |
suspension bushes front |
|
|
|
 |
Front Suspension Bush Set
High Quality: See individual parts below for more information.
(288: GTO) |
S288FS |
£262.91 |
|
 |
Front Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(288: GTO) |
S288FH |
£266.51 |
|
 |
|
Upper & Lower Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(288: GTO) |
103170 |
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(288: GTO) |
103170H |
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Front Wishbone Bush, inner, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(288: GTO) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Front Torsion Bar 'D' Rubber
(288: GTO) |
114703 |
£14.95 |
|
|
Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(288: GTO) |
104417 |
£24.95 |
|
|
Front Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
(288: GTO) |
104417S |
£27.95 |
|
|
Front Torsion Bar Rubber
Supersedes: 126097, 64430
(288 GTO) |
100984 |
£6.77 |
|
 |
Front Anti-Roll Bar Rubber Inner Bush
Supersedes: 64431
(288: GTO) |
100985 |
£13.97 |
|
|
Lower Front Wishbone Mounting 'U' Bolt Fork
2 required per side (4 req. per car)
(288: GTO) |
124161 |
£70.54 |
|
| |
|
|
|
|
| |
Suspension bushes rear |
|
|
|
 |
Rear Suspension Bush Set
High Quality: See individual parts below for more information.
(288: GTO) |
S288RS |
£412.35 |
|
 |
Rear Suspension Bush Set (Hard)
Uprated: See individual parts below for more information.
(288: GTO) |
S288RH |
£399.95 |
|
|
|
Upper & Lower Inner & Outer Rear Wishbone Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(288: GTO) |
103170 |
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Inner & Outer Rear Wishbone Bush
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(288: GTO) |
103170H |
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Inner & Outer Rear Wishbone Bush, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(288: GTO) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Rear Torsion Bar 'D' Rubber
Ø 14.5mm
(288: GTO) |
116381 |
£19.95 |
|
|
Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(288: GTO) |
104417 |
£24.95 |
|
|
High Quality Rear Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
Supersedes: 64429
(288: GTO) |
104417S |
£27.95 |
|
|
Lower Rear Wishbone Mounting 'U' Bolt Fork
2 required per side (4 req. per car)
(288: GTO) |
124163 |
£128.11 |
|
| |
|
|
|
|
| |
Powerflex teflon suspension bushes (trackday / fast road use) |
|
|
|
|
Upper Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Upper Rear Outer Wishbone Bush
Uprated: Polyurethane
Powerflex
(288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Rear Outer Wishbone Bush
Uprated: Polyurethane
Powerflex
(288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Upper Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
|
Lower Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(308: GT4, GTB/S); (208: GT4, GTB/S); (288: GTO); (F40) |
PF17-200 |
£32.95 |
|
| |
|
|
|
|
| |
Front wheel bearings and Hub |
|
|
|
|
Front Wheel Bearing
(288: GTO) |
112799 |
£363.21 |
|
 |
Front Hub Shaft Pin
(288: GTO) |
13909870 |
£0.46 |
|
 |
Hub Nut
(288: GTO) |
124642 |
£12.95 |
|
| |
|
|
|
|
| |
suspension spring rubbers |
|
|
|
|
Lower Suspension Spring Rubber
Per shock absorber
(288: GTO) |
113581 |
£11.95 |
|
|
Upper Suspension Spring Rubber
Per shock absorber
(288: GTO) |
113582 |
£39.95 |
|
| |
|
|
|
|
| |
Rear wheel bearings & hub |
|
|
|
|
Inner Rear Wheel Bearing
Supersedes: 125934, 145805, RIV AL 35
(288: GTO) |
101220 |
£34.20
|
|
|
Outer Rear Wheel Bearing
Supersedes: 125935
(288: GTO) |
144807 |
£86.28 |
|
 |
Rear Hub Oil Seal
(288: GTO) |
110579 |
£7.04 |
|
 |
Rear Hub Cover Ring
(288: GTO) |
103117 |
£54.01 |
|
|
Hub Nut
(288: GTO) |
124642 |
£12.95 |
|
| |
|
|
|
|
| |
Lock nuts |
|
|
|
|
Rear Hub Shaft Lock Nut
44mm
Use with tool RNT-44
Supersedes: 522670, 700648
(288: GTO) |
102289 |
£28.45 |
|
 |
Hub Shaft Ring Nut Tool
44mm |
RNT-44 |
£56.50 |
|
| |
|
|
|
|
| |
Shock absorbers |
|
|
|
|
Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(288: GTO) |
100809 |
£12.95 |
|
 |
Shock Absorber Bump Stop
Each
(288: GTO)
|
116358 |
£58.22 |
|
| |
|
|
|
|
| |
Drop Link |
|
|
|
 |
Rear Drop Link Cover
Each
(288: GTO)
|
124622 |
£12.99 |
|
| |
|
|
|
|
| |
mounts |
|
|
|
|
Front and Rear Shock Absorber Top Mount
(288: GTO) |
114812 |
£64.80 |
|
|
Top Mount Washer
2 required per mount
(288: GTO) |
114815 |
£1.80 |
|
| |
|
|
|
|
| |
Ball joints |
|
|
|
|
Upper Ball Joint
(288: GTO) |
116280/A |
£79.00 |
|
|
Lower Ball Joint
Supersedes: 114462, 101442, 154536, 640427, 641487
(288: GTO)
|
133944 |
£78.08 |
|
|
Lower Ball Joint Rubber Dust Cover Kit
Supersedes: 116280/K
(288: GTO)
|
133944/K |
£15.38 |
|
|
Ball Joint Rubber Boot |
24608155 |
£11.60 |
|
|
Ball Joint Washer
1 req. per ball joint (4 req. per car)
Supersedes: 12R1
(288: GTO) |
101445 |
£0.40 |
|
|
Ball Joint Nut
1 req. per ball joint (4 req. per car)
Supersedes: Ehrenrejch 035.0145.044.506
(288: GTO) |
149807 |
£0.61 |
|
| |
|
|
|
|
| |
Stub Axle |
|
|
|
 |
Front Stub Axle Washer
(288: GTO) |
118522 |
£8.61 |
|
| |
|
|
|
|
| |
Shims |
|
|
|
 |
Wishbone Mounting 'U' Bolt Shim |
|
|
|
| 1.0mm |
101039 |
£1.35 |
|
| 1.5mm |
107338 |
£1.35 |
|
| 2.0mm |
107339 |
£1.35 |
|
| 2.5mm |
107340 |
£1.35 |
|
| 3.0mm |
107341 |
£1.35 |
|
| |
|
|
|
|
|
Upper Ball Joint Shim
1.5mm
Supersedes: 641276
(288: GTO) |
103256 |
£3.29 |
|
| |
|
|
|
|
Lower Ball Joint Shim |
|
|
|
| 1.0mm |
164484 |
£2.20 |
|
| 1.2mm |
115073 |
£1.75 |
|
| 1.5mm |
101022 |
£1.75 |
|
| 2.0mm |
164485 |
£1.75 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
|
Washer
8mm Hole
Currently on manufacturer back order
|
113113 |
£4.35 |
|
 |
Washer
|
10519424 |
£0.02 |
|
|
Front Axle Bolt
(288: GTO) |
14238731 |
£0.67 |
|
 |
Stud
Supersedes: 13543521
(288: GTO)
|
13543524 |
£3.99 |
|
|
Anti Roll Bar Nut
Alternative
(288: GTO) |
16103621/A |
£0.92 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
