| |
All our inlet and exhaust valves are manufactured from top grade Austinetic 214N Stainless Steel.
All exhaust valves are double forged and where necessary, Stellite tipped with Stellite 12H and seats with Stellite 6H.
Finally, all valves are Pulse Plasma Nirtrided. |
|
| |
|
|
|
|
| |
Valves & Guides |
|
|
|
|
355 Inlet Valve
24 required |
35515005 |
£39.90 |
|
|
355 Exhaust Valve
16 required |
35515010 |
£44.10 |
|
 |
Exhaust Valve Seat
(355: 2.7 Motronic, 5.2 Motronic)
|
6140702 |
£10.06 |
|
|
Inlet Valve Guide
Supersedes: 149900, 172328
(355: 2.7 Motronic, 5.2 Motronic) |
176437 |
£36.95 |
|
|
Exhaust Valve Guide
Supersedes: 148190, 172329
(355: 2.7 Motronic, 5.2 Motronic) |
176438 |
£36.95 |
|
|
Valve Collet
(355: All) |
157986 |
£1.45 |
|
|
Hydraulic Valve Lifter
(355: 2.7 Motronic, 5.2 Motronic) |
149750 |
£39.23 |
|
| |
|
|
|
|
| |
Valve stem seal |
|
|
|
 |
Valve Stem Oil Seal
(355: 2.7, 5.2 Motronic) |
148153 |
£1.79 |
|
 |
Valve Seal Tool for 6mm diameter valve guide
Designed to overcome the problem of correctly installing valve stem seals. The seal is simply inserted onto the tool (see enlarged picture) and the tool is then inserted into the valve guide. The seal is now perfectly square to the location diameter and with a small amount of pressure on the end of the tool, the seal is installed effortlessly, without damage and right first time.
(355: All) |
VST-03
 |
£55.00 |
|
| |
|
|
|
|
| |
valve shims |
|
|
|
 |
Valve Shim Removal Tool
Set:
- Hardened & ground bucket tool with serrated finger grips
- Blacked Chrome Vanadium Steel lever tool
Supersedes: 95979560
|
AS9560 |
£92.00 |
|
| |
|
|
|
|
| |
Cam belt |
|
|
|
 |
355 Cam Tensioner Kit
Includes:
- 2 x 158157
- 2 x 154378
(355: 2.7 Motronic, 5.2 Motronic) |
35515045 |
£192.20 |
|
 |
Timing/Cam Belt
Supersedes: 181610, 184986
(355: 2.7 Motronic, 5.2 Motronic) |
154378 |
£28.50 |
|
 |
355 Cam Tensioner Bearing
Standard Single Roller
Supersedes: 167464
(355: 2.7 Motronic, 5.2 Motronic)
Bearing outer to bracket clearance must be checked on all installations. |
158157 |
£70.00 |
|
 |
355 Cam Tensioner Bearing
Up-rated with dual angular contact bearing
(355: 2.7 Motronic, 5.2 Motronic)
Bearing outer to bracket clearance must be checked on all installations. |
PT-355
|
£135.00 |
|
 |
Cam Belt Pulley
(355: 2.7 Motronic, 5.2 Motronic) |
157705/A |
£382.05 |
|
 |
Hydraulic Tensioner
(355: All) |
157356 |
£198.60 |
|
 |
Aftermarket Hydraulic Tensioner
(355: All) |
157356/A |
£126.88 |
|
 |
RH Cam Belt Cover
Currently on Manufacturer Back Order
(355: 2.7 Motronic, 5.2 Motronic) |
163877 |
£147.32 |
|
 |
RH Cam Belt Cover Guard
Currently on Manufacturer Back Order
(355: 2.7 Motronic) |
163849 |
£39.66 |
|
 |
Aluminium Cam Belt Guards
As per challenge specification
Pair Includes:
174688 - RH Guard
174689 - LH Guard
(355: Challenge 1999) |
174688/9 |
£99.50 |
|
 |
Lower Cam Belt Guard
(355: Challenge 1999) |
174690 |
£69.35 |
|
 |
Timing Belt Pulley Dowel
With Threaded Centre
(355: 2.7 Motronic, 5.2 Motronic) |
4146769 |
£12.30 |
|
| |
|
|
|
|
| |
Gasket Sets |
|
|
|
 |
Cam Cover Gasket Set
Without seals
Including Spark Plug 'O' Rings (x8)
(355: 2.7 Motronic, 5.2 Motronic) |
35515035 |
£48.73 |
|
 |
Cam Cover Gasket Set
With seals
(355: 2.7 Motronic, 5.2 Motronic) |
35515036 |
£83.18 |
|
| |
|
|
|
|
| |
Gaskets |
|
|
|
 |
LH Top Cover Gasket
1 required
(355: 2.7 Motronic (Early Models Only)) |
155477 |
£4.39 |
|
 |
RH Top Cover Gasket
1 required
(355: 2.7 Motronic (Early Models Only)) |
155476 |
£4.28 |
|
 |
LH Top Cover Gasket
1 required
(355: 2.7 Motronic, 5.2 Motronic) |
163620 |
£6.83 |
|
|
RH Top Cover Gasket
1 required
(355: 2.7 Motronic, 5.2 Motronic) |
163621 |
£6.83 |
|
 |
End Plate Gasket
2 required
(355: 2.7 Motronic, 5.2 Motronic) |
140787 |
£5.25 |
|
 |
RH Cam Cover Gasket
1 required
Short
Supersedes: 149467
(355: 2.7 Motronic, 5.2 Motronic) |
176156 |
£12.95 |
|
 |
LH Cam Cover Gasket
1 required
Long
Supersedes: 149468
(355: 2.7 Motronic, 5.2 Motronic) |
176157 |
£13.21 |
|
| |
|
|
|
|
| |
O Rings |
|
|
|
 |
Spark Plug ‘O’ Ring
8 required
(355: 2.7 Motronic, 5.2 Motronic) |
149554 |
£1.74 |
|
 |
Cam Shaft ‘O’ Ring
4 required
(355: 2.7 Motronic, 5.2 Motronic) |
158349 |
£2.80 |
|
 |
Rear Small Cover ‘O’ Ring
2 required
(355: 2.7, 5.2 Motronic) |
117275 |
£3.38 |
|
 |
Oil Exhaust Ducting ‘O’ Ring
2 required per ducting (6 req. per head/12 req. per car)
(355: All) |
147278 |
£0.36 |
|
| |
|
|
|
|
| |
Oil seals |
|
|
|
|
Camshaft Oil Seal
Viton
Supersedes: 105055, 110314, 134714, 136526, 163987
(355: 2.7 Motronic, 5.2 Motronic)
|
105389 |
£8.95 |
|
| |
|
|
|
|
| |
Valve Springs |
|
|
|
 |
Inner Valve Spring
(355: 2.7 Motronic, 5.2 Motronic) |
180208 |
£3.07 |
|
| |
|
|
|
|
| |
gears |
|
|
|
|
Cam Drive Gear
(355: 2.7 Motronic, 5.2 Motronic)
|
163949 |
£191.73 |
|
| |
|
|
|
|
| |
end plate |
|
|
|
|
Camshaft End Plate
(355: 2.7 Motronic, 5.2 Motronic)
|
148023 |
£11.81 |
|
| |
|
|
|
|
|
grommet |
|
|
|
|
Cable Grommet
(355: 2.7 Motronic, 5.2 Motronic) |
163861
|
£30.17 |
|
|
|
|
|
|
|
dowel |
|
|
|
|
Cylinder Head Dowel
(355: 2.7 Motronic, 5.2 Motronic) |
102725 |
£0.89 |
|
|
|
|
|
|
| |
Bolts, studs and screws |
|
|
|
|
Cylinder Head Stud
(355: 2.7 Motronic, 5.2 Motronic)
|
148311 |
£14.78 |
|
|
Cylinder Head Stud
(355: 2.7 Motronic, 5.2 Motronic)
|
11500624 |
£0.44 |
|
 |
Cylinder Head Stud
(355: 2.7 Motronic, 5.2 Motronic) |
13541624 |
£4.84 |
|
|
Top Cover Screw
(355: 2.7 Motronic, 5.2 Motronic)
|
160784 |
£0.82 |
|
|
Cam Cover Fixing Screw
(355: 2.7 Motronic, 5.2 Motronic)
|
163582
|
£21.10 |
|
|
Cam Drive Retaining Bolt
(355: 2.7 Motronic, 5.2 Motronic)
|
146540 |
£4.91 |
|
|
Cam Belt Tensioner Pulley Bolt
(355: 2.7 Motronic, 5.2 Motronic)
|
11307024 |
£3.01 |
|
 |
Threaded Stud
(355: 2.7 Motronic, 5.2 Motronic) |
13517121
|
£3.10 |
|
|
Cylinder Head Stud
(355: 2.7 Motronic, 5.2 Motronic) |
11500224 |
£0.32 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
 |
Washer
|
10519424 |
£0.02 |
|
| |
|
|
|
|
 |
Cylinder Head Nut
(355: All) |
148093
|
£11.50 |
|
|
CP Dome Nuts for Cam Covers. Pack of 10
As orginal chrome-plate on brass
Supersedes: 151230, 10044
|
24615170 |
£2.95 |
|
|
Exhaust Brass Locknut
M8 x 1.25
(355: 2.7 Motronic, 5.2 Motronic)
|
138392 |
£0.85 |
|
|
Cam Cover Washer, each
|
11197774 |
£0.07 |
|
 |
Rivet, 6x16
(355: Challenge)
|
15628570 |
£0.99 |
|
 |
Washer
Supersedes: 12648301, 61148700, 12643721, 12643704, 109684, 12643711, 14499324, 14499301
|
12643724 |
£0.05 |
|
| |
|
|
|
|
| |
camshafts |
|
|
|
|
Standard Profile Camshaft Set
|
35515145 |
£2358.40 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
