| |
Front Wishbone Bushes |
|
|
|
 |
Front Suspension Bush Set
High Quality: See below for more information
(360: Modena, Spider) |
36008010 |
£788.00 |
|
 |
| 4 x |
 |
Upper Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Modena, Spider) |
|
184610 |
£89.00 |
|
| 4 x |
 |
Lower Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Modena, Spider) |
|
184609 |
£76.84 |
|
| 2 x |
 |
Front Torsion Bar Rubber
2 required per car
(360: Modena, Spider, Challenge Stradale) |
|
170588 |
£19.89 |
|
| 1 x |
 |
LH Front Drop Link
Supersedes: 259572
(360: Modena, Spider, Challenge Stradale) |
|
162619 |
£42.43 |
|
| 1 x |
 |
RH Front Drop Link
Supersedes: 259573
(360: Modena, Spider, Challenge Stradale) |
|
162620 |
£42.43 |
|
|
|
 |
Front Suspension Bush Set
High Quality: See below for more information
(360: Challenge Stradale) |
36008015 |
£768.17 |
|
|
| 4 x |
 |
Lower Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Challenge Stradale) |
|
209166 |
£82.00 |
|
| 4 x |
 |
Upper Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Challenge Stradale) |
|
209167/A |
£79.60 |
|
| 2 x |
|
Front Torsion Bar Rubber
2 required per car
(360: Modena, Spider, Challenge Stradale) |
|
170588 |
£19.89 |
|
| 1 x |
|
LH Front Drop Link
Supersedes: 259572
(360: Modena, Spider, Challenge Stradale) |
|
162619 |
£42.43 |
|
| 1 x |
|
RH Front Drop Link
Supersedes: 259573
(360: Modena, Spider, Challenge Stradale) |
|
162620 |
£42.43 |
|
| |
|
|
|
|
| |
Rear Wishbone Bushes |
|
|
|
 |
Rear Suspension Bush Set
High Quality: See below for more information
(360: Modena, Spider) |
36008025 |
£774.00 |
|
|
| 4 x |
|
Upper Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Modena, Spider) |
|
184610
 |
£89.00 |
|
| 4 x |
|
Lower Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Modena, Spider) |
|
184609
|
£76.84 |
|
| 1 x |
 |
Rear Torsion Bar Rubber
Outer Half
1 required per car
(360: Modena, Spider, Challenge Stradale) |
|
170716 |
£15.98 |
|
| 1 x |
 |
Rear Torsion Bar Rubber
Inner Half
1 required per car
(360: Modena, Spider, Challenge Stradale) |
|
170717 |
£15.02 |
|
| 1 x |
 |
RH Rear Drop Link
(360: Modena, Spider, Challenge Stradale) |
|
161109 |
£39.82 |
|
| 1 x |
|
LH Rear Drop Link
(360: Modena, Spider, Challenge Stradale) |
|
161110 |
£39.82 |
|
|
|
 |
Rear Suspension Bush Set
High Quality: See below for more information
(360: Challenge Stradale) |
36008030 |
£723.09 |
|
|
| 4 x |
|
Lower Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Challenge Stradale) |
|
209166
|
£82.00 |
|
| 4 x |
|
Upper Front & Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: Challenge Stradale) |
|
209167/A
|
£79.60 |
|
| 1 x |
|
Rear Torsion Bar Rubber
Outer Half
1 required per car
(360: Modena, Spider, Challenge Stradale) |
|
170716 |
£15.98 |
|
| 1 x |
|
Rear Torsion Bar Rubber
Inner Half
1 required per car
(360: Modena, Spider, Challenge Stradale) |
|
170717 |
£15.02 |
|
| 1 x |
|
RH Rear Drop Link
(360: Modena, Spider, Challenge Stradale) |
|
161109 |
£39.82 |
|
| 1 x |
|
LH Rear Drop Link
(360: Modena, Spider, Challenge Stradale) |
|
161110 |
£39.82 |
|
| |
|
|
|
|
| |
Ball joint |
|
|
|
 |
Uprated Upper Ball Joint
Uprated: Stainless Steel
Replaces #203633 (plated)
(360: All) |
UBJ-360
 |
£125.00 |
|
 |
Extractor for Upper Ball Joint
To Use with UBJ-360
(360: All) |
AV-UBJ360
|
£75.00 |
|
 |
Upper Ball Joint Rubber Boot
(360: All) |
171848
|
£19.50 |
|
| |
|
|
|
|
 |
Uprated Lower Ball Joint
Uprated: Stainless Steel
Replaces #203632 (plated)
(360: All) |
LBJ-360
|
£125.00 |
|
 |
Extractor for Lower Ball Joint
To Use with LBJ-360
(360: All) |
AV-LBJ360
|
£75.00 |
|
 |
Lower Ball Joint Rubber Boot
(360: All) |
171847
|
£19.50 |
|
| |
|
|
|
|
 |
Ball Joint Glue
|
36008005 |
£73.00 |
|
 |
Adhesive Dispenser Gun
For 50ml Cartridges
|
184241/GUN
|
£39.50 |
|
| |
|
|
|
|
| |
Bolts and Studs |
|
|
|
 |
Upper Suspension Mount Stud
(360: All)
|
170155 |
£1.73 |
|
|
Rear Lower Wishbone Bolt
(360: All) |
182215/A |
£4.92 |
|
|
Allen Screw
M10 x 1.25
(360: All) |
170950 |
£2.33 |
|
|
Wishbone Bush Threaded Insert
(360: All) |
13582271 |
£3.31 |
|
 |
Track Rod Joint Bolt
(360: All)
|
179556 |
£41.52 |
|
 |
Front and Rear Wishbone Lower Mounting Bolt
(360: All)
|
181598 |
£41.32 |
|
 |
Lower Front Wishbone Bush Stud
(360: All)
|
170154 |
£2.17 |
|
| |
|
|
|
|
| |
Roll BAr |
|
|
|
|
Roll Bar Bush
19mm
(360: Challenge)
|
181468 |
£26.84 |
|
| |
|
|
|
|
| |
tie rods |
|
|
|
 |
Front Track Rod End
Uprated: Stainless steel
Rear Track Rod when used with #194791-01
Supersedes: 178930
(360: All) |
181882H
|
£185.00 |
|
 |
Front Track Rod End
Original Ferrari
Supersedes: 178930
(360: All) |
181882 |
£415.25 |
|
 |
Track Rod End Rubber Cover
(360: All) |
181882C |
£34.95 |
|
| |
|
|
|
|
 |
Rear Tie Rod
Uprated: Stainless steel
(360: All) |
194794
|
£195.00 |
|
|
Rear Tie Rod
Uprated: Stainless steel
To be used with #181882H
(360: All) |
194791-01 |
£168.00 |
|
|
Rear Tie Rod Assy Complete
Uprated: Stainless steel
(360: All) |
194791/H |
£335.00 |
|
|
Rear Tie Rod Assy
Original Ferrari
(360: All) |
194791 |
£640.05 |
|
| |
|
|
|
|
| |
Hub |
|
|
|
|
Complete Front & Rear Hub Bearing
(360: All) |
179070 |
£558.71 |
|
| |
|
|
|
|
|
Front/Rear Hub Nut
Supersedes: 148851, 186712
(360: All) |
209184 |
£24.19 |
|
| |
|
|
|
|
| |
Shock absorber |
|
|
|
 |
Upper Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: All) |
212948
|
£69.50 |
|
|
Lower Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(360: All) |
157630
|
£39.95 |
|
|
Lower Front Suspension Bush Spacer
(360: Modena, Spider, Challenge Stradale) |
193492
|
£21.08 |
|
|
Lower Rear Shock Absorber Bolt
(360: All) |
204974 |
£26.44 |
|
|
Lower Front Shock Absorber Bolt
120mm Length
(360: All) |
204977 |
£46.52 |
|
|
Lower Front Shock Absorber Bolt
130mm Length
(360: Modena, Spider, Challenge) |
177660 |
£10.39 |
|
 |
Lower Shock Absorber Nut
Supersedes: 95900617, 102825
(360: All)
|
M12NUT |
£0.38 |
|
 |
Retainer Nut for Shock Absorbers
Spring Perch
(360: All) |
174725
|
£67.05 |
|
| |
|
|
|
|
| |
road springs |
|
|
|
|
Front Spring
(360: Modena, Spider)
|
190676 |
£124.50 |
|
|
Rear Spring
(360: Modena, Spider)
|
190677/A |
£168.62 |
|
| |
|
|
|
|
| |
wishbones |
|
|
|
|
R/H Lower Rear Wishbone
(360: All) |
200943 |
£399.69 |
|
|
L/H Lower Rear Wishbone
(360: All) |
200944 |
£399.69 |
|
|
RH Lower Rear Wishbone
(360: All) |
200941 |
£364.14 |
|
|
RH Lower Rear Wishbone
Used
This is for the Bare Wishbone
The Lower Ball Joint has been Removed
(360: All) |
200941/U |
£150.00 |
|
|
Upper Front Wishbone
(360: All) |
193456 |
£406.80 |
|
|
Upper Rear Wishbone
(360: All) |
200946 |
£364.14 |
|
|
Upper Rear Wishbone
Used
This is for the Bare Wishbone
The Upper Ball Joint and Bushes have been Removed
(360: All) |
200946/U |
£135.00 |
|
|
LH Lower Rear Wishbone
(360: All) |
200942 |
£364.14 |
|
|
LH Lower Rear Wishbone
Used
This is for the Bare Wishbone
The Lower Ball Joint has been Removed
(360: All) |
200942/U |
£150.00 |
|
|
Lower Front Wishbone
(360: All) |
200940 |
£792.84 |
|
|
Lower Front Wishbone
Used
This is for the Bare Wishbone
The Lower Ball Joint has been Removed
(360: All) |
200940/U |
£250.00 |
|
| |
|
|
|
|
| |
suspension Spares |
|
|
|
|
Compensator Ring Bushing
(360: All) |
179554 |
£3.27 |
|
|
Compensator Ring Bushing
(360: All) |
179555 |
£3.16 |
|
| |
|
|
|
|
| |
suspension Shims |
|
|
|
|
Front Wishbone Shim |
|
|
|
| 1mm |
178851 |
£10.62 |
|
| 1.5mm |
186943 |
£6.33 |
|
| 2mm |
178852 |
£11.84 |
|
| 2.5mm |
186944 |
£3.33 |
|
| 3mm |
178853 |
£12.41 |
|
| 4mm |
178940 |
£15.05 |
|
| |
|
|
|
|
|
Rear Wishbone Shim, Long Tail |
|
|
|
| 1mm |
175910 |
£6.30 |
|
| 2mm |
175911 |
£7.54 |
|
| 3mm |
175912 |
£1.80 |
|
| 4mm |
178953 |
£2.00 |
|
| |
|
|
|
|
|
Rear Wishbone Shim, Short Tail |
|
|
|
| 1mm |
178942 |
£1.06 |
|
| 2mm |
178943 |
£11.34 |
|
| 3mm |
178944 |
£1.31 |
|
| 4mm |
178954 |
£15.38 |
|
| |
|
|
|
|
| |
Lock Nut |
|
|
|
 |
Suspension Lock Nut Spanner
(360: All) |
LNS-02 |
£49.50 |
|
| |
|
|
|
|
| |
Rubber |
|
|
|
 |
Suspension Spring Upper Rubber
(360: All)
|
177688 |
£5.26 |
|
 |
Suspension Spring Lower Rubber
(360: All)
|
169684 |
£8.33 |
|
 |
Shock Absorber Pad
(360: Challenge Stradale, Modena, Spider)
|
174728 |
£68.10 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
|
Nut
M10 x 1.25 x 8mm
Supersedes: 1079014
(360: All)
|
12164714 |
£0.32 |
|
|
Anti Roll Bar Washer
(360: All)
|
12601474 |
£0.04 |
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
 |
Washer
|
10519424 |
£0.02 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
|
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
