| |
Our silent bloc bush range has the following specifications:
- High grade SMR based natural rubber
- 68 and 85 shore hardness
- Tearing strength of 24MPa
- Rubber is bonded to inner and outer metal sections (it is not assembled unbounded), which means that inner and outer sections stay in position and do not migrate, and the metal sleeve does not rotate in the rubber.
- Zinc-plated or black-passivated to resist corrosion
- Cured at temperature and high pressure |
|
| |
|
|
|
|
| |
Front SUSPENSION BUSHES |
|
|
|
 |
Front Torsion Bar Bush Set High Quality: See below for more information. (365: GT 2+2) |
V1208007 |
£85.32 |
|
 |
| 4 x |
 |
Front Torsion Bar Rubber
2 required per drop link (4 req. per car)
Supersedes: 126097, 64430
(365: GT) |
|
100984 |
£6.77 |
|
| 2 x |
 |
Front Drop Link Silent Bloc Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
1 required per drop link (2 req. per car)
Supersedes: 60220, RIV 88.109.541
(365: GT) |
|
100773 |
£17.79 |
|
| 2 x |
 |
Front Torsion Bar ‘D’ Rubber
2 required per car
Supersedes: 104862, 640335, 641101
(365: GT) |
|
108745 |
£14.88 |
|
 |
 |
Upper & Lower Front Inner Wishbone 'O' Ring
4 required per wishbone (8 req. per car) Supersedes: OR 6187 (365: GT) |
95860201 |
£1.95 |
|
 |
Upper & Lower Front Inner Wishbone Washer
4 required per wishbone (8 req. per car) (365: GT) |
|
|
|
| 2.70mm |
64841/1 |
£36.83 |
|
| 2.85mm |
64841/2 |
£36.83 |
|
| 3.00mm |
64841/3 |
£36.83 |
|
| 3.15mm |
64841/4 |
£36.83 |
|
| 3.30mm |
64841/5 |
£36.83 |
|
| 3.60mm |
64841/6 |
£36.83 |
|
| 4.00mm |
64841/7 |
£36.83 |
|
| |
|
|
|
|
 |
Upper & Lower Front Inner Wishbone Bush Assy. Uprated: Stainless Steel & Bronze
4 required per wishbone (8 req. per car)
Each complete bush includes 1 of each of: 64838, 64827.
(365: GT) |
V1208065 |
£59.95 |
|
 |
Upper & Lower Front Inner Wishbone Bush
Uprated: Bronze
4 required per wishbone (8 req. per car)
(365: GT) |
64838 |
£28.39 |
|
 |
 |
Upper & Lower Front Outer Wishbone Washer
4 required per wishbone (8 req. per car) (365: GT) |
|
|
|
| 2.75mm |
64598/1 |
£24.11 |
|
| 2.85mm |
64598/2 |
£24.11 |
|
| 3.05mm |
64598/3 |
£24.11 |
|
| 3.15mm |
64598/4 |
£24.11 |
|
| 3.35mm |
64598/5 |
£24.11 |
|
| 3.45mm |
64598/6 |
£24.11 |
|
| 3.55mm |
64598/7 |
£24.11 |
|
| 3.65mm |
64598/8 |
£24.11 |
|
| 3.75mm |
64598/9 |
£24.11 |
|
| 3.85mm |
64598/10 |
£24.11 |
|
| |
|
|
|
|
 |
Upper & Lower Front Outer Wishbone Bush 4 required per wishbone (8 req. per car) (365: GT) |
65143 |
£23.98 |
|
 |
Upper & Lower Front Outer Wishbone Nut Washer Currently on manufacturer back order
4 required per wishbone (8 req. per car) (365: GT) |
94179 |
|
|
| |
|
|
|
|
 |
Lower Front Wishbone Centre Bush
2 required per wishbone (4 req. per car) (365: GT) |
65201 |
£29.30 |
|
 |
|
Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(365: GT) |
104417 |
£24.95 |
|
|
High Quality Front Torsion Bar 'D' Rubber Bracket Uprated: Stainless Steel 2 required per car Supersedes: 64429 (365: GT) |
104417S |
£27.95 |
|
| |
|
|
|
|
|
Front Drop-Link Washer
1 required per drop link (2 req. per car)
Supersedes: 94667
(365: GT) |
100774 |
£5.74 |
|
|
Front Drop-Link Spacer
Currently on Manufacturer Back Order
2 required per drop link (4 req. per car)
Supersedes: 64554
(365: GT) |
100771 |
£P.O.A |
|
 |
Front Anti-Roll Bar Rubber Inner Bush
Supersedes: 64431 (365: GT) |
100985 |
£13.97 |
|
 |
Front Suspension Bump Stop Rubber
(365: GT 2+2) |
64816 |
£12.25 |
|
 |
Front Suspension Nut
(365: GT 2+2) |
94439 |
£16.38 |
|
|
Front Rubber Bump Stop
(365: GT 2+2) |
61429 |
£98.54 |
|
| |
|
|
|
|
| |
Rear SUSPENSION BUSHES |
|
|
|
 |
Rear Suspension Bush Set
High Quality: See below for more information. (365: GT 2+2) |
V1208025 |
£311.80 |
|
 |
| 8 x |
 |
Upper & Lower Inner Rear Wishbone Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
4 required per wishbone (8 req. per car)
Supersedes: 101091, 129583, 601853
(365: GT 2+2) |
|
134883 |
£29.80 |
|
| 4 x |
 |
Rear Torsion Bar Rubber
2 required per drop link (4 req. per car)
Supersedes: 126097, 64430
(365: GT 2+2) |
|
100984 |
£6.77 |
|
| 2 x |
 |
Rear Drop Link Silent Bloc Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
1 required per drop link (2 req. per car)
Supersedes: 60220, RIV 88.109.541
(365: GT 2+2) |
|
100773 |
£17.79 |
|
| 2 x |
 |
Rear Torsion Bar ‘D’ Rubber
2 required per car
Supersedes: 104862, 640335, 641101
(365: GT 2+2) |
|
108745 |
£14.88 |
|
 |
 |
Upper & Lower Outer Rear Wishbone Bush Rebuild Kit
Rebuild kit for 4 bushes. Includes all bushes and rubbers except the outer bush.
1 kit required per wishbone (2 req. per car)
Uprated: Stainless Steel
(365: GT)
Each kit (4 per set) includes 1 of each of:
101014 (600957), 101044 (OR 3150), 100785 (600740), 101009 (600771),
100787 (101315, 600750, 660826), 101043 (OR 4106),
100788 (601338), 101011 (600956), 600739-S (601232). |
V1208090RK |
£294.69 |
|
|
Small Suspension 'O' Ring
Supersedes: OR 4106 |
101043 |
£0.66 |
|
Large Suspension 'O' Ring Supersedes: OR 3150 |
101044 |
£0.95 |
|
 |
|
Rear Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(365: GT) |
104417 |
£24.95 |
|
|
High Quality Rear Torsion Bar 'D' Rubber Bracket Uprated: Stainless Steel 2 required per car Supersedes: 64429 (365: GT) |
104417S |
£27.95 |
|
| |
|
|
|
|
| |
Shims |
|
|
|
 |
Shim |
|
|
|
| 1.0mm |
101039 |
£1.35 |
|
| 1.5mm |
107338 |
£1.35 |
|
| 2.0mm |
107339 |
£1.35 |
|
| 2.5mm |
107340 |
£1.35 |
|
| 3.0mm |
107341 |
£1.35 |
|
| |
|
|
|
|
| |
innerpin |
|
|
|
|
Front Suspension Top Inner Pin
Aftermarket
(365: GT 2+2) |
64836/A |
£302.26 |
|
|
Front Suspension Lower Inner Pin
Aftermarket
(365: GT 2+2) |
64837/A |
£298.87 |
|
| |
|
|
|
|
| |
Kingpin |
|
|
|
|
Kingpin Lock Tab
(365: GT 2+2) |
94430 |
£11.46 |
|
|
Kingpin Needle Roller Housing
Aftermarket
(365: GT 2+2) |
64125/A |
£63.64 |
|
|
Kingpin Top Dust Cover
(365: GT 2+2) |
64220 |
£65.59 |
|
|
Kingpin Thrust Washer
Aftermarket
(365: GT 2+2) |
64548/A |
£56.20 |
|
|
Kingpin Thrust Washer
Aftermarket
(365: GT 2+2) |
64549/A |
£62.48 |
|
|
Kingpin Needle Roller
(365: GT 2+2)
|
92615 |
£1.42 |
|
| |
|
|
|
|
| |
Spring |
|
|
|
|
Front Road Spring
(365: GT 2+2) |
641173 |
£149.95 |
|
| |
|
|
|
|
| |
Shock Absorber Rubbers |
|
|
|
|
Rear Suspension Spring Rubber Set
Per shock absorber
Includes 1 x top & 1 x bottom rubber
Supersedes: 100776, 103263, 103264, 105223, 118747, 600925, 640423, 640424
(365: GT 2+2)
|
30808220
 |
£29.95 |
|
|
Rear Suspension Spring Upper Rubber
2 required per car
(365: GT 2+2) |
100772/A |
£22.95 |
|
| |
|
|
|
|
| |
Shock absorber bushes |
|
|
|
 |
Front Shock Absorber Bush High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit. (365: GT 2+2) |
94678 |
£17.95 |
|
 |
 |
Upper Rear Shock Absorber Bush High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit. 1 required per shock absorber Supersedes: 101051, 640429, 641393 (365: GT 2+2) |
100809 |
£12.95 |
|
 |
Lower Rear Shock Absorber Bush High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit. 1 required per shock absorber Supersedes: 601352 (365: GT 2+2) |
100810 |
£14.95 |
|
| |
|
|
|
|
| |
anti roll bars |
|
|
|
|
Anti Roll Bar Link
Aftermarket
Supersedes: 64543
(365: GT 2+2)
|
104420/A |
£686.70 |
|
| |
|
|
|
|
| |
Front wheel bearings |
|
|
|
|
Inner Front Wheel Bearing Supersedes: 4096587 (365: GT 2+2) |
101363 |
£25.65 |
|
|
Outer Front Wheel Bearing (365: GT 2+2) |
101218 |
£45.83 |
|
| |
|
|
|
|
|
Front Wheel Oil Seal
Viton
(365: All) |
101219 |
£12.00 |
|
| |
|
|
|
|
| |
Rear wheel bearings |
|
|
|
|
Rear Brake Disc Bearing Supersedes: AL 55 (365: GT 2+2) |
95892200 |
£82.40 |
|
|
Rear Brake Disc Double Ball Bearing Supersedes: 6 AA Non (365: GT 2+2) |
95890602 |
£84.58 |
|
| |
|
|
|
|
|
Rear Brake Disc Oil Seal
75.55.10
(365: GT 2+2) |
95850403 |
£6.03 |
|
| |
|
|
|
|
| |
lock nuts |
|
|
|
|
Lock Nut (365: GT 2+2) |
94944 |
£35.79 |
|
|
Front Hub Shaft Lock Nut
LH Thread
(365: GT 2+2) |
92429 |
£28.00 |
|
|
Front Hub Shaft Lock Nut
RH Thread
Supersedes: 11638021
(365: GT 2+2) |
92431 |
£28.00 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
|
Shim Washer
Supersedes: 95320
(365: GT 2+2 MK2 from 12811)
|
100794 |
£0.69 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|