| |
Our silent bloc bush range has the following specifications:
- High grade SMR based natural rubber
- 68 and 85 shore hardness
- Tearing strength of 24MPa
- Rubber is bonded to inner and outer metal sections (it is not assembled unbounded), which means that inner and outer sections stay in position and do not migrate, and the metal sleeve does not rotate in the rubber.
- Zinc-plated or black-passivated to resist corrosion
- Cured at temperature and high pressure |
|
| |
|
|
|
|
| |
SUSPENSION BUSHES (FRONT) |
|
|
|
|
Front Suspension Bush Set
High Quality: See below for more information.
(575: All) |
V1208541
 |
£448.41 |
|
 |
| 4 x |
 |
Upper Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per front end)
(575: All) |
|
186493
 |
£48.63 |
|
| 4 x |
 |
Lower Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. front end)
(575: All) |
|
186494
 |
£69.14 |
|
| 2 x |
 |
Front Anti Roll Bar 'D' Rubber
Ø 27mm
2 required per car
(575: All) |
|
208324
 |
£15.96 |
|
 |
 |
Torsion Bar Bracket Supersedes: 239775
(575: All) |
133802
 |
£19.98 |
|
| |
|
|
|
|
 |
RH/LH Front Drop Link
Each
(575: All) |
183711/2 |
£122.26 |
|
 |
Drop Link Covers
Pair
(575: All) |
183711/2/
COVER |
£19.86 |
|
 |
Drop Link Spacer
(575: All) |
183711/2/
SPACER |
£9.95 |
|
| |
|
|
|
|
| |
SUSPENSION BUSHES (REAR) |
|
|
|
|
Rear Suspension Bush Set
High Quality: See below for more information.
(575: Standard setup) |
V1208551
 |
£834.50 |
|
 |
| 4 x |
 |
Upper Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: Standard setup) |
|
186496
 |
£53.50 |
|
| 4 x |
 |
Upper Rear Wishbone Bush, outer
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: Standard setup) |
|
186493
 |
£48.63 |
|
| 4 x |
 |
Lower Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: Standard setup) |
|
186495
 |
£72.58 |
|
| 4 x |
 |
Lower Rear Wishbone Bush, outer
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: Standard setup) |
|
186496
 |
£53.50 |
|
| 2 x |
 |
Rear Anti Roll Bar 'D' Rubber
Ø 17mm
2 required per car
Supersedes: 212936
(575: Standard setup) |
|
153146
 |
£9.39 |
|
|
Rear Suspension Bush Set
High Quality: See below for more information.
(575: HGTC handling pack) |
V1208552
 |
£839.95 |
|
 |
| 4 x |
 |
Upper Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: HGTC handling pack) |
|
186496
 |
£53.50 |
|
| 4 x |
 |
Upper Rear Wishbone Bush, outer
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: HGTC handling pack) |
|
186493
 |
£48.63 |
|
| 4 x |
 |
Lower Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: HGTC handling pack) |
|
186495
 |
£72.58 |
|
| 4 x |
 |
Lower Rear Wishbone Bush, outer
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
2 required per wishbone (4 req. per rear end)
(575: HGTC handling pack) |
|
186496
 |
£53.50 |
|
| 2 x |
 |
Rear Anti Roll Bar 'D' Rubber
Ø 19.5mm
2 required per car
Supersedes: 212936
(575: HGTC handling pack) |
|
210897
 |
£12.68 |
|
 |
 |
Torsion Bar Bracket Supersedes: 239775
(575: All) |
133802
 |
£19.98 |
|
 |
Rear Anti Roll Bar 'D' Rubber 17mm Supersedes: 212936 (575: All) |
153146
 |
£9.39 |
|
 |
Rear Drop Link 2 required (575: All) |
171812 |
£48.63 |
|
| |
|
|
|
|
| |
Powerflex teflon suspension bushes (trackday / fast road use) |
|
|
|
|
Upper Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(575: All) |
PF17-200 |
£32.95 |
|
|
Upper Rear Outer Wishbone Bush
Uprated: Polyurethane
Powerflex
(575: All) |
PF17-200 |
£32.95 |
|
| |
|
|
|
|
| |
Ball joints |
|
|
|
|
Upper Ball Joint
(575: All) |
132776/A |
£76.00 |
|
|
Lower Ball Joint
(575: All)
|
154396 |
£118.52 |
|
|
Front and Rear Shock Absorber Lower Ball Joint
(575: M Maranello) |
153285 |
£339.99 |
|
 |
Shock Absorber Lower Ball Joint Rubber
2 Required per shock absorber
(575: M Maranello)
|
153286
|
£1.99 |
|
|
Ball Joint Rubber |
24608155 |
£11.60 |
|
|
Tie Rod/Lower Ball Joint Washer
(575: All)
|
152249 |
£0.61 |
|
| |
|
|
|
|
| |
Road springs |
|
|
|
|
|
Front Road Spring
(575: All) |
163648 |
£98.71 |
|
| |
|
|
|
|
| |
Anti Roll BAr |
|
|
|
|
Roll Bar Bracket
(575: All) |
239775 |
£19.25 |
|
| |
|
|
|
|
| |
HGTC |
|
|
|
|
|
HGTC Air Delivery Hose
(575: M Maranello, SuperAmerica) |
213621 |
£113.53 |
|
| |
|
|
|
|
| |
suspension spring rubbers |
|
|
|
|
Lower Suspension Spring Rubber
Per shock absorber
(575: All) |
113581
 |
£11.95 |
|
|
Upper Suspension Spring Rubber
Per shock absorber
(575: All) |
113582
 |
£39.95 |
|
| |
|
|
|
|
| |
Shims |
|
|
|
 |
Shim |
 |
|
|
| 1.0mm |
101039 |
£1.35 |
|
| 1.5mm |
107338 |
£1.35 |
|
| 2.0mm |
107339 |
£1.35 |
|
| 2.5mm |
107340 |
£1.35 |
|
| 3.0mm |
107341 |
£1.35 |
|
| |
|
|
|
|
|
Lower Ball Joint Shim |
 |
|
|
| 1.0mm |
164484 |
£2.20 |
|
| 1.2mm |
115073 |
£1.75 |
|
| 1.5mm |
101022 |
£1.75 |
|
| 2.0mm |
164485 |
£1.75 |
|
| |
|
|
|
|
| |
Suspension Bolts |
|
|
|
|
Rear Suspension Bolt
(575: All) |
144747 |
£25.47 |
|
|
Lower Front Ball Joint Bolt
(575: All)
|
15971734 |
£23.04 |
|
|
Lower Rear Fork Bolt
(575: All) |
106422 |
£23.27 |
|
|
Lower Front Wishbone Fork Bolt
(575: All) |
106419 |
£13.48 |
|
|
Rear Suspension Bolt
(575: All) |
159309 |
£23.02 |
|
| |
|
|
|
|
| |
Shock absorber |
|
|
|
|
Lower Rear Shock Absorber Bush High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit. (575: M) |
157630
 |
£39.95 |
|
 |
|
Lower Front & Rear Shock Absorber Bush High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit. (575: Superamerica) |
157630
 |
£39.95 |
|
| |
|
|
|
|
| |
hub |
|
|
|
 |
Rear Hub Nut
(575: M Maranello) |
188161 |
£3.38 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
|
Washer
Supersedes: 12646601
15mm OD x 6.15mm ID x 1.5mm Thickness
|
12646604 |
£0.23 |
|
 |
Washer
|
10519424 |
£0.02 |
|
 |
Threaded Stud
Supersedes: 12354524
(575: All) |
13517121
|
£3.10 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|