| |
The silent bloc bush range has the following specifications:-
Rubber is high grade SMR based natural rubber
68 and 85 shore hardness
Tearing strength is 24MPa
Rubber is bonded to inner and outer metal sections (it is not assembled unbonded) which means inner and outer stay in position and do not migrate, and the metal sleeve does not rotate in the rubber
Zinc plated yellow or black passivated for resisting corrosion
Cured at temperature and high pressure |
|
| |
|
|
|
|
| |
BUSH SETS FRONT |
|
|
|
 |
Front Suspension Bush Set
(328: All 1985, 1988 (to car 76625 – pre ABS)) |
S328FS |
£257.91 |
|
 |
Front Suspension Bush Set (Hard)
(328: All 1985, 1988 (to car 76625 – pre ABS)) |
S328FH |
£261.51 |
|
 |
|
Front Suspension Bush Set
(328: 1988 (from car 76626 – ABS)) |
S328FS88L |
£292.93 |
|
|
Front Suspension Bush Set (Hard)
(328: 1988 (from car 76626 – ABS)) |
S328FH88L |
£296.53 |
|
| |
|
|
|
|
| |
BUSH SETS Rear |
|
|
|
 |
Rear Suspension Bush Set
(328: 1985 (GTB)) |
S328RS |
£275.61 |
|
 |
Rear Suspension Bush Set (Hard)
(328: 1985 (GTB)) |
S328RH |
£284.21 |
|
|
|
Rear Suspension Bush Set
(328: 1985 (GTS)) |
S328RS85S |
£265.81 |
|
|
Rear Suspension Bush Set (Hard)
(328: 1985 (GTS)) |
S328RH85S |
£264.21 |
|
|
|
Rear Suspension Bush Set
(328: 1988 (to car 76625 – pre ABS)) |
S328RS88E |
£229.41 |
|
|
Rear Suspension Bush Set (Hard)
(328: 1988 (to car 76625 – pre ABS)) |
S328RH88E |
£274.41 |
|
|
 |
Rear Suspension Bush Set
(328: 1988 (from car 76626 – with ABS)) |
S328RS88L |
£468.61 |
|
 |
Rear Suspension Bush Set (Hard)
(328: 1988 (from car 76626 – with ABS)) |
S328RH88L |
£472.21 |
|
| |
|
|
|
|
| |
Suspension bushes front |
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: All) |
103170
 |
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Front Wishbone Bush, inner
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: All) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Front Wishbone Bush, inner, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: All) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Front Torsion Bar 'D' Rubber
(328: 1985, 1988 (to car 76625 - pre ABS)) |
108746
|
£12.96 |
|
|
Front Torsion Bar 'D' Rubber Bracket
To be used with 108746
(328: 1985, 1988 (to car 76625 - pre ABS)) |
106577
|
£17.91 |
|
|
High Quality Front Torsion Bar 'D' Rubber Bracket
Uprated: Stainless Steel
To be used with 108746
(328: 1985, 1988 (to car 76625 - pre ABS)) |
106577S
|
£16.86 |
|
|
Front Torsion Bar 'D' Rubber
21mm inner diameter
(328: 1988 (from car 76626 – with ABS)) |
130533
|
£28.96 |
|
|
Front Torsion Bar Nut
Alternative
(328: 1988 (from car 76626 – with ABS)) |
16103621/A |
£0.92 |
|
| |
|
|
|
|
|
Front Torsion Bar Rubber
Supersedes: 64430, 126097
(328: All) |
100984
|
£6.77 |
|
 |
Front Anti-Roll Bar Rubber Spacer Tube
(328: 1985, 1988 (to car 76625 - pre ABS))
|
108998
|
£14.60 |
|
 |
Front Anti-Roll Bar Rubber Inner Bush
1 required per drop link (2 req. per car)
Supersedes: 64431
(328: 1988 (from car 76626 – with ABS)) |
100985
|
£13.97 |
|
| |
|
|
|
|
|
Front Suspension Bush Spacer
Large
(328: All) |
30808005
|
£7.95 |
|
|
Front Suspension Bush Spacer
Small
#104399
(328: All) |
30808010
|
£4.45 |
|
| |
|
|
|
|
|
Upper Inner Front Wishbone Bush Bolt, front half
1 required per side (2 req. per car)
Supersedes: 127849
(328: 1985, 1988 (to car 76625 - pre ABS)) |
121693 |
£22.65 |
|
|
Upper Inner Front Wishbone Bush Washer, front half
1 required per side (2 req. per car)
(328: 1985, 1988 (to car 76625 - pre ABS)) |
106426
|
£0.89 |
|
|
Upper Inner Front Wishbone Bush Bolt, rear half
1 required per side (2 req. per car)
(328: 1985, 1988 (to car 76625 - pre ABS)) |
105901 |
£10.38 |
|
|
Lower Inner Front Wishbone Bush Bolt
71mm
2 required per side (4 req. per car)
(328: 1985, 1988 (to car 76625 - pre ABS, with fork #134929)) |
106419 |
£13.48 |
|
|
Lower Inner Front Wishbone Bush Bolt
68mm
2 required per side (4 req. per car)
Supersedes: 127849
(328: 1985, 1988 (to car 76625 - pre ABS, with fork #127636)) |
121693 |
£22.65 |
|
|
Upper & Lower Inner Front Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolts #105901, 106419 & 121693
Supersedes: 16105121
(328: 1985, 1988 (to car 76625 - pre ABS)) |
148020 |
£3.89 |
|
|
Upper Front Ball Joint Bolt
2 required per side (4 req. per car)
Supersedes: 15971431
(328: 1985, 1988 (to car 76625 - pre ABS)) |
15971421 |
£6.95 |
|
|
Lower Outer Front Ball Joint Bolt
1 required per side (2 req. per car)
Supersedes: 104519
(328: 1985, 1988 (to car 76625 - pre ABS)) |
15971621 |
£0.61 |
|
|
Lower Front Ball Joint/Lower Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(328: 1985, 1988 (to car 76625 - pre ABS)) |
105344 |
£24.86 |
|
 |
Upper & Lower Front Ball Joint Nut
3 required per side (6 req. per car)
Use with bolts #105344, 15971421 & 15971621
Supersedes: 104114, 117702
(308: All)
|
M10NUT |
£0.34 |
|
| |
|
|
|
|
| |
Suspension bushes rear |
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: All) |
103170
|
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: All) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Inner Rear Wishbone Bush, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: All) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Upper & Lower Outer Rear Wishbone Bush Assy. Set
Complete set for one hub (4 complete bush assemblies)
Zinc plated
(328: All 1985, 1988 (up to car 76625 - pre-ABS))Each complete bush (4 per set) includes 1 of each of:
109902 (107438), 105342 (641216), 101009 (600771),
100796 (94943), 109905 (105339),
100787 (101315, 600750, 660826), 105340 (601684), 105343 (641217), 105341 (601685). |
30808091
|
£166.15 |
|
|
Upper & Lower Outer Rear Wishbone Bush Assy. Set
Complete set for one hub (4 complete bush assemblies)
Uprated: Stainless Steel
(328: All 1985, 1988 (up to car 76625 - pre-ABS)) Each complete bush (4 per set) includes 1 of each of:
109902 (107438), 105342 (641216), 101009 (600771),
100796 (94943), 109905 (105339),
100787 (101315, 600750, 660826), 105340 (601684), 105343 (641217), 105341 (601685). |
30808090
|
£186.60 |
|
 |
Bush Assy. Inner Bush
Stainless Steel
Supersedes: 105339
(328: All 1985, 1988 (up to car 76625 - pre-ABS)) |
109905-S |
£19.95 |
|
 |
Large Rear Hub Rubber Seal
Supersedes: 641216
(328: All 1985, 1988 (up to car 76625 - pre-ABS)) |
105342
|
£4.25 |
|
 |
Small Rear Hub Rubber Seal
Supersedes: 641217
(328: All 1985, 1988 (up to car 76625 - pre-ABS)) |
105343
|
£3.95 |
|
|
Upper & Lower Outer Rear Wishbone Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: 1988 (from car 76626 - with ABS)) |
103170
|
£24.43 |
|
| |
|
|
|
|
|
Upper & Lower Outer Rear Wishbone Bush
Hard 85-shore hardness rubber
Uprated: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: 1988 (from car 76626 - with ABS)) |
103170H
|
£23.95 |
|
| |
|
|
|
|
|
Teflon Upper & Lower Outer Rear Wishbone Bush, Flamblock Style with Teflon Washers
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 104398, 111616, 111617, 154536, 157701, 161571, 163038, 601134, 601157, 641271
(328: 1988 (from car 76626 - with ABS)) |
103170F |
£39.95 |
|
| |
|
|
|
|
|
Upper & Lower Inner Rear Wishbone Bush Bolt
68mm
4 required per side (8 req. per car)
Supersedes: 127849
(328: 1985) |
121693 |
£22.65 |
|
|
Upper & Lower Inner Rear Wishbone Bush Bolt
71mm
4 required per side (8 req. per car)
(328: 1988 (up to car 76625- pre-ABS)) |
106419 |
£13.48 |
|
|
Upper & Lower Outer Rear Wishbone Bush Bolt
2 required per side (4 req. per car)
(328: All 1985, 1988 (up to car 76625- pre-ABS)) |
105344 |
£24.86 |
|
|
Upper & Lower Inner & Outer Rear Wishbone Bush Nut
4 required per side (8 req. per car)
Use with bolts #105344 & 106419
Supersedes: 16105121
(328: All 1985, 1988 (up to car 76625- pre-ABS)) |
148020 |
£3.89 |
|
| |
|
|
|
|
|
Drop Link Silent Bloc Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(328: All)
|
100773
|
£17.79 |
|
|
Drop Link Silent Block Bush Washer
2 required per side (4 req. per car)
(328: All) |
108913
|
£9.23 |
|
| |
|
|
|
|
|
Rear Torsion Bar 'D' Rubber
(328: 1985 (GTB), All 1988) |
109010
|
£14.95 |
|
|
Rear Torsion Bar 'D' Rubber
(328: 1985 (GTS)) |
108748
|
£9.50 |
|
|
Rear Torsion Bar 'D' Rubber Bracket
Zinc Plated
2 required per car
Supersedes: 64429
(328: All) |
104417 |
£24.95 |
|
|
High Quality Rear Torsion Bar Bracket
Uprated: Stainless Steel
Supersedes: 64429
(328: All) |
104417S
|
£27.95 |
|
| |
|
|
|
|
|
Rear Torsion Bar Rubber
(328: All 1985, 1988 (up to car 76625 (pre-ABS))) |
108244
|
£6.77 |
|
|
Rear Torsion Bar Rubber
(328: 1988 (from car 76626 (with ABS))) |
107335
|
£6.52 |
|
 |
Anti roll bar spacer for rubbers
Supersedes: 107336, 154085
(328: GTB)
|
108294
|
£26.95 |
|
|
Rear Torsion Bar Washer
2 required per side (4 req. per car)
(328: All 1985, 1988 (up to car 76625 (pre-ABS))) |
107409 |
£1.99 |
|
| |
|
|
|
|
| |
Powerflex teflon suspension bushes (trackday / fast road use) |
|
|
|
|
Upper Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(328: All) |
PF17-200 |
£32.95 |
|
|
Upper Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(328: All) |
PF17-200 |
£32.95 |
|
|
Lower Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(328: All) |
PF17-200 |
£32.95 |
|
| |
|
|
|
|
| |
Shock absorbers (only available in pairs) |
|
|
|
| |
|
Front Shock Absorber
Each
Supersedes: 128177, 130939
(328: up to car 76625 (pre-ABS)) |
133177 |
£459.71 |
|
|
Rear Shock Absorber
Each
(328: up to car 76625 (pre-ABS)) |
128178 |
£427.42 |
|
|
Front Fast Road/Race Shock Absorber, each
Spax
(328: up to car 76625 (pre-ABS)) |
30808250 |
£522.90 |
|
|
Rear Fast Road/Race Shock Absorber, each
Spax
(328: up to car 76625 (pre-ABS)) |
30808255 |
£536.23 |
|
|
|
Uprated Front Spring, each
For Spax Shock Absorber
(328: up to car 76625 (pre-ABS)) |
30808170 |
£72.77 |
|
 |
Uprated Rear Spring, each
For Spax Shock Absorber
(328: up to car 76625 (pre-ABS)) |
30808185 |
£79.77 |
|
|
|
|
Front Shock Absorber
Each
(328: from car 76625 (with ABS)) |
138263 |
£498.63 |
|
|
Rear Shock Absorber
Each
(328: from car 76625 (with ABS)) |
138264 |
£547.21 |
|
 |
|
Front Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(328: All 1985, 1988 (To car 76625 - pre-ABS. Also from car 76626 with shock abosorber #136884)) |
100809
|
£12.95 |
|
|
Front Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(328: 1988 (From car 76626 - with ABS, with shock absorber #138263)) |
130516
|
£24.74 |
|
|
Upper Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 127849
(328: All 1985, 1988 (to car 76625 - pre-ABS)) |
121693 |
£22.65 |
|
|
Lower Front Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(328: 1985, 1988 (to car 76625 - pre ABS)) |
105344 |
£24.86 |
|
| |
|
|
|
|
|
Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 101051, 640429, 641393
(328: All 1985, 1988 (To car 76625 - pre-ABS)) |
100809
|
£12.95 |
|
|
Upper Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
Supersedes: 127849
(328: All 1985, 1988 (To car 76625 - pre-ABS)) |
121693 |
£22.65 |
|
|
Lower Rear Shock Absorber Mounting Bolt
1 required per side (2 req. per car)
(328: All 1985, 1988 (To car 76625 - pre-ABS)) |
106290 |
£19.81 |
|
|
Lower Rear Shock Absorber Mounting Bolt Nut
Alternative
1 required per side (2 req. per car)
(328: All 1985, 1988 (To car 76625 - pre-ABS))
|
16103621/A |
£0.92 |
|
|
Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(328: 1988 (From car 76626 - with ABS)) |
130516
|
£24.74 |
|
| |
|
|
|
|
| |
Suspension Forks |
|
|
|
|
Lower Front Suspension Fork
2 required per side (4 req. per car)
Supersedes: 104409, 127636
(328: All 1985, 1988 (To car 76625 - pre-ABS)) |
134929 |
£69.95 |
|
| |
|
|
|
|
|
Lower Rear Suspension Fork
2 required per side (4 req. per car)
(328: 1985) |
127638 |
£69.45 |
|
|
Lower Rear Suspension Fork
2 required per side (4 req. per car)
Supersedes: 104409, 127636
(328: 1988 (To car 76625 - pre-ABS)) |
114236 |
£89.69 |
|
| |
|
|
|
|
| |
Mounts |
|
|
|
|
Front Shock Absorber Top Mount
(328: GTB/GTS 1988 (From car #76626)) |
114812 |
£64.80 |
|
|
Top Mount Washer
2 required per mount
(328: GTB/GTS 1988 (From car #76626)) |
114815 |
£1.80 |
|
 |
Top Mount Stud
Supersedes: 13543821
(328: GTB/GTS 1988) |
13543824 |
£2.31 |
|
| |
|
|
|
|
| |
Road springs |
|
|
|
 |
|
|
Uprated Front Spring, each
Fits both GTB and GTS cars
Uprated
(328: All 1985, 1988 (Up to car 76625 - pre-ABS)) |
30808165 |
£99.50 |
|
|
|
Uprated Rear Spring, each
Fits both GTB and GTS cars
Uprated
(328: All 1985, 1988 (Up to car 76625 - pre-ABS)) |
30808180 |
£99.50 |
|
| |
|
|
|
|
|
Front & Rear Suspension Spring Rubber Set
Per shock absorber
Includes 1 x top & 1 x bottom rubber
Supersedes: 103263, 103264, 105223, 640423, 640424
(328: All 1985, 1988 (Up to car 76625 - pre-ABS)) |
30808220
|
£29.95 |
|
 |
|
|
Front Spring, each
Fits both GTB and GTS cars
(328: 1988 (From car 76626 - with ABS)) |
133157 |
£302.59 |
|
|
Rear Suspension Spring Rubber Set
Per shock absorber
Includes 1 x top & 1 x bottom rubber
Supersedes: 103263, 103264, 105223, 640423, 640424
(328: 1988 (From car 76626 - with ABS)) |
30808220
|
£29.95 |
|
|
Lower Suspension Spring Rubber
Per shock absorber
(328: 1988) |
113581
|
£11.95 |
|
|
Upper Suspension Spring Rubber
Per shock absorber
(328: 1988) |
113582
|
£39.95 |
|
| |
|
|
|
|
| |
Ball joints |
|
|
|
|
Upper Ball Joint
(328: All) |
116280/A |
£79.00 |
|
|
Lower Ball Joint
Supersedes: 114462, 101442, 154536, 640427, 641487
(328: All)
|
133944 |
£78.08 |
|
|
Lower Ball Joint Rubber Dust Cover Kit
Supersedes: 116280/K
(328: All)
|
133944/K |
£16.15 |
|
|
Ball Joint Rubber Boot |
24608155 |
£11.60 |
|
|
Ball Joint Washer
1 req. per ball joint (4 req. per car)
Supersedes: 12R1
(328: All) |
101445 |
£0.69 |
|
|
Ball Joint Nut
1 req. per ball joint (4 req. per car)
Supersedes: Ehrenrejch 035.0145.044.506
(328: All) |
149807 |
£0.61 |
|
| |
Bump Stops |
|
|
|
|
Bump Stop
(328: GTB/GTS) |
104414/A |
£20.11 |
|
| |
|
|
|
|
| |
Stub Axle |
|
|
|
 |
RH Front Stub Axle
(328: 1985 & 1988 upto chassis #76625) |
125711/A |
£987.56
|
|
 |
Front Stub Axle Washer
(328: 1985 & 1988 upto chassis #76625) |
118522 |
£8.61 |
|
| |
|
|
|
|
| |
Drop Link |
|
|
|
 |
Rear Anti-Roll Bar Drop Link
(328: All) |
108432 |
£187.43 |
|
| |
|
|
|
|
| |
Shims |
|
|
|
 |
Wishbone Mounting 'U' Bolt Shim |
|
|
|
| 1mm |
101039 |
£1.35 |
|
| 1.5mm |
107338 |
£1.35 |
|
| 2mm |
107339 |
£1.35 |
|
| 2.5mm |
107340 |
£1.35 |
|
| 3mm |
107341 |
£1.35 |
|
| |
|
|
|
|
|
Upper Ball Joint Shim
1.5mm
Supersedes: 641276
(328: All) |
103256
|
£3.29 |
|
| |
|
|
|
|
Lower Ball Joint Shim |
|
|
|
| 1.00mm |
164484 |
£2.20 |
|
| 1.2mm |
115073 |
£1.75 |
|
| 1.5mm |
101022 |
£1.75 |
|
| 2.00mm |
164485 |
£1.75 |
|
| |
|
|
|
|
| |
Wheel bearings & hubs |
|
|
|
| |
|
Front Wheel Bearing
(328: All) |
112799 |
£363.21 |
|
|
Front Wheel Bearing Stay Bolt Washer
(328: All)
|
124464 |
£15.88 |
|
|
Front Wheel Bearing Inner Shield
(328: 1988)
|
131279 |
£48.74 |
|
|
Front Wheel Bearing Outer Shield
(328: 1988)
|
112823 |
£39.83 |
|
 |
Hub Cover
(328: GTB/GTS 1988) |
131278 |
£9.95 |
|
 |
Front Hub Shaft Pin
(328: All) |
13909870 |
£0.46 |
|
 |
Hub Nut
(328: All) |
124642 |
£12.95 |
|
| |
|
|
|
|
| |
|
Rear Inner Wheel Bearing
Supersedes: 125934, 145805, RIV AL 35
(328: All) |
101220 |
£34.20 |
|
|
Rear Outer Wheel Bearing
Supersedes: 125935
(328: All) |
144807 |
£86.28 |
|
|
Rear Outer Wheel Bearing Spacer
(328: All)
|
124965
|
£38.21 |
|
|
Rear Wheel Bearing Inner Oil Seal
(328: All)
|
115968
|
£19.43 |
|
|
Rear Wheel Bearing Outer Oil Seal
(328: All)
|
124966
|
£19.60 |
|
 |
Rear Hub Cover Ring
(328: GTB/S) |
103117 |
£54.01 |
|
|
Hub Nut
(328: All) |
124642 |
£12.95 |
|
| |
|
|
|
|
| |
lock nuts |
|
|
|
|
Rear Hub Shaft Lock Nut
44mm
Use with tool RNT-44
Supersedes: 522670, 700648
(328: All) |
102289 |
£28.45 |
|
 |
Hub Shaft Ring Nut Tool
44mm |
RNT-44 |
£56.50 |
|
| |
|
|
|
|
| |
Anti Roll BAr |
|
|
|
|
Anti Roll Bar Washer
(328: 1988) |
105334 |
£6.95 |
|
 |
Rear Anti-Roll Bar Washer
(328: 1988) |
117285 |
£1.27 |
|
| |
|
|
|
|
| |
MIsc Nuts, Bolts & Washers |
|
|
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
 |
Washer
|
10519424 |
£0.02 |
|
|
Front Axle Bolt
(328: GTB/S) |
14238731 |
£0.67 |
|
|
12mm Spring Washer
Supersedes: 127498
|
10517070 |
£0.29 |
|
| |
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
|
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
| |
|
|
|
|
